Specifications

Temperature & Humidity
Smart Sensor
INSTRUCTION
Contents of Package
 Sensor x1
 Lanyard x1
 Back clip x1
 3M tape x1
 Bracket x1
Main Function
 Real-time monitoring temperature and
humidity.
 Push notifications when the
temperature or humidity exceed the
limits.
 Calibrate temperature and humidity.
 Chart graph display.
 Save and export data.
 Kinds of accessories for easily
installation.
Specifications
Battery: CR2477 3V 1000mAH
Standby current: ≤3uA
Protocol: bluetooth5.0
Wireless Range: 50m
Operating Temperature: -20 ℃ ～ 85 ℃ (-4° F ～
185°F)
Operating Humidity: 0% ～ 95%
Temperature Accuracy: ±0.3 ℃ ~ ±1.2 ℃ /
(±0.5 ° F ~ ±2.2 ° F )
Humidity Accuracy: ±3% ~ ±5%
Working time: About 18 months
Wireless Type : 2.4GHz
Size: 46mm x46mm x15 mm
Download App
 Download “SensorPro” app from app
store or google paly.
Add Device
1. Remove the battery insulation sheet of
the sensor;
2. Run “SensorPro” app on your smart
phone ;
3. Take the device close to your phone;
4. Click “+” to add device to app;
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation. Any Changes or
modifications not expressly approved by
the party responsible for compliance could
void the user's authority to operate the
equipment.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving
antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20cm between the radiator & your
body.
Device setting
1. Click the device item on the gray
area to go to device setting;
2.
Click the camera icon to
customize your scenes picture.
3.
Click Delete button to remove the
device.
Chart display
Click the data area on the device item
to show the history data chart.
3
Unit Switching
Click to go App setting screen.
The temperature unit can be set
as Fahrenheit( º F ) or Celsius ( ℃ ).
Accessories
Kinds of accessories to help you to install the
device in different scenes.