User's Manual

6
Indicator status description
LED
indicator
LED
indicator
status
Red light
off blue
light off
Red light
off blue
light on
The device
is charging
Power on
and Enter
standby
Charging
status
LED
indicator
Red light on
Blue light on
Red light on
blue light off
Red light on
blue light off
Report an error
There is a metal
foreign body
contacting the
sensing area
The device is
fully charged
1 2
3 4 5
User Manual
Technical specifications
product name
product model
Input
Output
Power
Product Size
product weight
Operating
temperature
(SK-SW15-004C)
SK-SW15-004C
PD 5V 2A 9V 2.22A 12V 1.67A
5V 1A 9V 1.12A 9V 1.67A 12V 1.25A
5W/7.5W/10W/15W
60*50*90mm
About 99.5g
0℃~40℃
Do not place this product on carpets, heaters,
fabric materials, or expose to direct sunlight.
Do not drop, squeeze, disassemble or puncture
this product by yourself.
Do not place this product in a high temperature,
humid environment.
Do not throw this product into fire, water or liquid
containing corrosiveness.
Please keep the temperature between 0℃~35℃
during charging.
Do not place this product on flammable materials
(beds and blankets) while charging.
If you find that the product has swelling or other
undesirable phenomena and malfunctions, please
stop using the product immediately and contact
your dealer.
Unless a professional is nearby to supervise and
guide and ensure the safety of the user, the following
people(including children) are not suitable to use this
product: people with deteriorating physical function
or mental capacity, those with insufficient knowledge
of this equipment and lack of operating experience, Be
sure to supervise children to ensure safe use.
Cautions
Name and content of hazardous
substances in the product
Part
Name
Harmful Substance
Circuit
board
assembly
Hardware
parts
Plastic
parts
Accessories
This form is compiled in accordance with SJ/T
11364-2014.
O: Indicates that the content of the hazardous
substance in all homogeneous materials of the
part is below the limit requirement of GB/T 26572.
X: Indicates that the hazardous substance contained
in at least one of the homogeneous materials of the
part exceeds
Note: 1. The environmental protection service life
marked on this product only applies to the product
working under the conditions specified in the user
manual.
2. The reason why this product is marked with "X" is
that there is no alternative technology or component
to choose from at this stage.
This product still meets the restriction requirements
of the EU RoHS Directive 2015/863/EU.
Warranty Card
warranty period:
The warranty period of this product is valid within
12 months from the date of purchase.
Free service:
Free maintenance is not available in the following situations:
During the product warranty period, for any faults
caused by the quality of the product itself, the user
is requested to contact the dealer with this warranty
card and purchase certificate to enjoy free warranty.
1.The product warranty period exceeds period;
2.No warranty card or damaged product label;
3. Failure to use in accordance with the instructions,
or damage caused by the use of non-original
accessories;
4.Damage caused by yourself dismantling and repairing;
5. Failure caused by water ingress or falling and
Man-made mechanical damage;
6. Failure or damage caused by force majeure;
7. Counterfeit and shoddy products purchased
through informal channels.
Customer Service Information:
Customer Name
Contact address
Contact number
Product name
Product model
Purchase date
Sellers
S/N number
Maintenance
records
Schematic diagram of product interface
To ensure safety, please read this manual carefully
before use and follow the instructions herein.Store
this manual in a secure place for future reference.
This product is used to charge DC input mobile
phones and other electronic devices.
Note: Please check whether your device
supports wireless charging before using
this product for charging!
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
Note:This equipment has been tested and found to comply
with the limits for a class B digital device,pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio
frequence energy and,if not installed and used in accordance
with the instructions,may cause harmful interference to
radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this
equipmemt does cause harmful interference to radio or
television reception,which can be determined by turning
the equipment off and on,the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an autlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF
exposure requirement,This equipment should be installed
and operated with a minumum distance of 20 cm between
the radiator.
Wireless Charger
Wireless Charger
There is a 3M tape attached to the base of the product,
the user can tear off the protective layer when using it,
fix the charging base on the table, and supply power to
it through a USB-C cable