User's Manual
APP Functions
B. Open the "Smart Life" APP, tap "Add Device", select Lighting - Lighting (Wi-Fi) and
enter the password (if applicable), and tap "Next" (Note: Connect the phone to the
2.4GHz network. 5GHz Wi-Fi network is not supported.)
C. Go on the configuration process. After connecting, it will pop up a message "Device
added successfully," which means that the 3-in-1 Sky Moon Light has been connected.
1. Tap on the Sky Moon Light icon to enter the APP interface, and tap the "Power Switch"
to turn on or off the light.
4. Configuration
1) Connect the product to the power supply, and it will turn on automatically, slide to
Wi-Fi modeļ¼
2) Connect to the Wi-Fi network: Turn on the product, and then turn it off / on 3 times
according to the following steps: OFF - ON - OFF - ON - OFF - ON until the indicator
light flashes quickly. Note: The switching interval should not exceed 10 seconds.
5