Users’ Manual of BC03 The picture is only provided for reference.
Table of Contents 1. Preface ................................................................. 2 2. Accessories .......................................................... 2 3. Introduction of Product ....................................... 2 4. Precautions .......................................................... 3 5. Introduction of Product Panel.............................. 4 6. Instructions of Operations ................................... 6 7. Report on the Equipment Compatibility ............. 8 8.
1. Preface To the users: Welcome to become the user of Shengtianlong electrical appliance and thanks for patronage! Please read this Users’ Manual carefully before use to make full use of the play functions and know well about the system connection and usage. At the same time, you will find that you can find your requirements about the product met in the aspects of design, workmanship and human-based operations, etc. Please keep this Users’ Manual well for future reference.
. Precautions First thanks for buying the digital combination audio produced by this company! Please refer to this Users’ Manual before use to use it properly. The contents stated herein may be modified from time to time for better service as the product properties and functions are changed without prior notice. For the sound performances of the product, never use it in too cold, too hot, too dusty or humid places, especially: 1. Moist or underwater conditions 2.
encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help.
1. OFF/ON: Power switch 2. DC 5V: DC 5V MICRO USB charge with the lithium battery charge hole. (The hole beside it is the red charge indicator lamp of 3.7 V lithium battery) 3. AUX IN: Input hole for 3.5mm plug to connect the external sound source LED INDICATOR LAMP: LED (Blue): The blue LED indicator lamp will flicker during the Bluetooth connection and pair and will keep ON after successful connection and pair.
A. When one end of the MICRO USB connecting cable is connected to the computer in any state and at any time, and the other end is connected to DC 5V hole on the back of the product, the 3.7 V lithium battery will be charged. B. When the unit is totally out of power, switch the “OFF/ON” button to “OFF” then connect USB to charge it. C. It will take 3 hours for 3.
2). Press “□” button for more than 3 seconds, the blue lamp will flicker and the unit will enter into PAIR state; 3). Activate the Bluetooth features of Bluetooth cell phone so that the cell phone starts to search for the Bluetooth device. Please refer to the users’ manual for details; 4). Select “P200” from the device found by the cell phone; 5).
Hands-free Answer: When there is incoming call during music play mode, the unit speaker will ring and press “□” button shortly to answer the call. Hang-up Press “□” button shortly during in hands-free call status to hang up and return to the music play mode. Refuse calls: Press “□” button for more than 3 seconds at time of incoming call to refuse the call. Call-back: Press “□” button twice during the Bluetooth music play state to dial back the phone call made last time.
iPhone 3G iPhone 3GS NOKIA N95 NOKIA N78 Android OS NOKIA 5800 NOKIA 6110 NOKIA 5300 NOKIA 6230 Blackberry 8310 Blackberry 9700 SAMSUNG Galaxy SAMSUNG gt-s5628 Sony Ericsson W910i Remarks: Besides the cell phones and equipment mentioned above, the product also supports all cell phones and equipment with Bluetooth features to play music in theory! 8. Main Technical Parameters Bluetooth specifications: BluetoothV3.
9. Guidance on Simple Troubleshooting Failure Resolutions Bluetooth pair and connection fail Other cell phone or equipment has been connected before connection, and has not left yet and Bluetooth cannot be switched off. When connection feature is employed again, the Bluetooth unit will automatically search for this Bluetooth equipment for connection. First turn off the Bluetooth feature of Bluetooth equipment and the next Bluetooth equipment can search, pair and connect normally.
Bluetooth cannot be connected to other several cell phones and equipment Bluetooth unit has been connected to the current cell phone; to pair with and connect to the next cell phone, please press the PAIR button on the unit for a longer time to disconnect the last cell phone and click “CONNECT” after the next cell phone has searched the Bluetooth pair name.
