User Instruction for the Bluetooth Hands-free Speaker Model: BC07 Please keep this manual well for future use and this company will not notify you about any updated versions.
TABLE OF CONTENTS Introduction.......................................................................................................... 2 Precautions ......................................................................................................... 2 Definitions of Keypads and Jacks ........................................................................ 3 Start Up ............................................................................................................... 4 Power Off ............
Introduction This product is a kind of Bluetooth sound system supporting stereo music, hands-free for answering calls, equipped with digital signal processing technology, echo and noise removal feature. It is applied to the different circumstances like office and house, etc., and it may be connected to most other equipment and mobile phones supporting Bluetooth feature by means of wireless for hi-quality hands-free calls and play the stereo music from other equipment and mobile phones.
Warning: 1. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 2. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Definitions of Keypads and Jacks There are 5 keys and 3 jacks defined as below: : Press it shortly to power ON/ OFF.
Note: The user is recommended to keep 5m from the product to keep the normal service quality! SOME INITIALIZED STATES INITIALIZATION The red LED indicator lamp keeps ON. INITIALIZATION USB (1000mA) jack may output normally for charging voltage. Start Up Press “ ” key shortly after power-on to startup, 1. During the first use, the blue LED lamp will flicker to access to PAIR mode. 2.
5). In case of some kinds of cell phones, users have to key in the identification code “0000” and press ENTER key to match the product and mobile phone and after success, the green /the blue LED lamps will keep ON. 6). Press RETURN key of mobile phone to exit from the mobile phone menu and make sure that the distance between the hands-free and mobile phone is within 10 meters and free from any obstacle, users can answer calls and play music at this moment. Precautions 1.
In Bluetooth music play mode, users can ” or “ ” key for a longer time to adjust the volume. Shortly press or press “ ” key to play/ pause the music play. Shortly press “PAIR/ Users use Hands-free Function Answer Calls The speaker will ring up when there are incoming calls during music play, just press “ ” key shortly to answer. Hang up Calls Press “ ” key shortly during hands-free call to hang up calls and then return to the music play mode.
Power on and no device is connected PAIR status Completely pair the connection status AUX IN mode Service status The adaptor shuts off after power supply is disconnected Blue LED lamp flickers once every 5 seconds (Bluetooth has been used to connect equipment) Blue LED lamp flickers Blue LED lamp turns ON 6 seconds later Green LED lamp turns ON Blue LED lamp keeps ON All LED lamps turns OFF immediately The horn honks slightly Mobile phones Supporte iPad 2 iPad 1 iPhone 4S iPhone 4 iPhone 3GS iPhone 3G N
Product Specification Bluetooth specifications: Bluetooth 2. 1+EDR USB charging voltage and current: 5V/1000mA Output power: Output Level 2, and the longest connecting distance of 10 meters Working frequency scope: 2. 402GHz -2. 480GHz unlicensed ISM band Supporting Profiles: HSP, HFP 1. 5, A2DP and AVRCP Profiles Dimensions: 296×117×115(mm) (LxWxD) Weight: Approximately 0. 865KG (mainframe) Power output/Current (Adaptor): Input: 100-240 V~, 50/60 Hz, 0.45 A; Output: 9.0 V 2.