H Series——with Pan/Tilt of Mega pixel IP Camera 537 - User Manual
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels Index 1 INTRODUCTION ...........................................................................................................................4 1.1 THE PACKAGE INCLUDES .................................................................................................................4 1.2 FUNCTION AND FEATURES ...............................................................................................................4 1.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 6 5.5.1 Device Information Checking ............................................................................................20 5.5.2 Date and Time Setting........................................................................................................21 5.5.3 Default Setting ...................................................................................................................21 ADVANCED APPLICATION..................
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 1 Introduction The IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. 1.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 9 Manufacture provides free software, support Multi-view, Long time recording, video replay etc. 1.3 Technical Parameters Item Image Capture Pan/Tilt Assistant Video and Audio Network Other Sub item Description Sensor Mega pixels CMOS sensor Minimum illumination IR lights on,0 Lux Lens f=3.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels Alarm In 1 way Alarm Out 1 way Audio In Internal mic x 1, audio input interface x 1 Audio Out audio output interface x 1 Weight 374g Main body 111mm(L)*110mm(W)*125mm(H) Physical Power DC 5V Index Power consumption <6W Operating temperature -20℃~ 50℃ Humidity 10% ~ 80% non-condensing OS Supported Microsoft Windows 98/2000/XP/Vista etc. Software(PC Browser Side) Internet Explorer6.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 3 Visit IP Camera from LAN 3.1 Lan connection Figure 3 3.2 Search and set the ip address of the ip camera Run “HSearch_en.exe” in the CD, the setting interface as figure 4. Operation Steps: 1) Click “Search (F3); 2) Choose the device; 3) Change the ip address of the ip camera according to the information in the red frame on the left.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels Figure 4 NOTE: 1) If you don’t know how to fill out the content of “IP config”, you could also tick the “Set IP automatically” to get the IP address from the router automatically. 2) If you have the firewall software in your PC, when you run the HSearch_en.exe, it may pop up a window to say “whether you want to block this program or not”, then you should choose not to block. 3) The default ip address is 192.168.0.158 and default http port is 80.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 3.3 Visit IP Camera Suggest to use internet explorer or compatible browser to visit it for the first time (use other browsers, please refer to 6.1), you will be required to install the ActiveX before viewing the video. As Figure 5, click “Download ActiveX (when first use)”. The dialog just as Figure 6 will pop up accordingly. Click “Run”, then it will download and install the ActiveX automatically.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels Figure 8 ① connection status display ② Record status display:if click “Record” in figure 7, it will show “REC” which stands for recording; click record button again, it will stop. ③ Zoom out, zoom in and reduction picture buttons ④ File saving location setting:you may set the location for recording and capturing, the default location is d:/record; ⑤ Talk-back button::it can transmit the sound which collected by the computer to the equipment.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 4 Visit IP Camera from WAN 4.1 Wan connection Figure 9 4.2 Port forwarding If visit IP Camera from WAN, you must do port forwarding on the router. Take Netgear router for example.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 3) 4) Input IP camera port; Input IP camera IP address,click “Apply”(the http port and ip address should be the same as figure 4 which set by you own). Note: Different router has different settings for port-forwarding; please kindly follow your router guide to do the port-forwarding. After the port-forwarding is done, you could view the IP Camera from WAN now. 4.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5 Other Settings 5.1 Video Setting Page 5.1.1 Video Setting Figure 13 5.1.2 Audio Setting Figure 14 After you change any settings for Audio, you need to power off the item and reboot it. Audio on, click the audio play button as in Figure 7, you can hear the sound from IP Camera. Audio off, you will save Bandwidth and storage space.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.1.3 Image Setting Figure 15 5.2 Network Setting Page 5.2.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.2.2 WIFI Setting Figure 17 Please use the network cable to connect the device into Internet before doing settings of wireless connection. Please follow the above 1-4 steps to do the settings, then click “ apply” to save the settings. You can also check the wireless network is connected successfully or not by clicking “ Check” button.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.3.2 Motion Detection Setting Figure 19 Please click “apply” after settings are done, and motion detection takes effect. The bigger the digital, and the higher sensitivity. 5.3.3 Alarm Mode Setting After it triggers the alarm, the camera will store the capture pictures and videos according to your settings, to store in SD, or upload to FTP, or email you, etc.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.3.4 Alarm Time Setting Figure 21 The device will trigger the alarm only during the armed time period. Note: Please make sure your system time is correct before you set the alarm time period. Please refer to 5.5.2 to set system time. 5.4 Advance Setting 5.4.1 User Management Figure 22 There are 3 levels of user authorization. ¾ Administrator:”admin” has the highest authority. It can do any settings.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.4.2 Auto Capture Setting Figure 23 Tick “Save Picture on the SD card”, the snap pictures will be stored onto SD card. 5.4.3 E-mail Setting ¾ ¾ Figure 24 SMTP server: fill with email server address, for example: sohu email sever, here you should fill with “smtp.sohu.com” In Figure 24, the blanks which have been filled with info should be filled. If any info is not filled right, the setting will fail.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.4.4 FTP Setting Figure 25 In order to use FTP function, user should apply username and password on the FTP server first. And please apply some storage, and the authority to write and create sub-category into it. 5.4.5 Alarm Server Setting Figure 26 Please confirm if you have connected to alarm server. The alarm message format as follow: GET /api/alarm.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.5 System Setting Page 5.5.1 Device Information Checking Figure 27 ¾ Device ID is set by factory. Every ID is unique ¾ Network Connection status will display “LAN” when connected by wired cable and display “Wireless LAN” connected by wireless Router. ¾ SD status will remind if SD card inserted and display the free capacity.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 5.5.2 Date and Time Setting Figure 28 Please refer to above Figure 28. Select the time zone first. There are three options to set the time and date. One is manually, another is keeping the same as the time and date on the computer, and the third one is getting it from the NTP server. 5.5.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels 6 Advanced Application 6.1 Other web browser visit device In the Windows OS, using browser with IE kernel, user must download the Active-x. Please Download “QuickTime” plug-in and install it before you use Safari, Firefox to access the IP camera. (We suggest QuickTime 7.6) After installation, users can start the QuickTime program, and to access the QuickTime Preferences dialog box from Edit Menu. Click Advanced, select “custom.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels Figure 31 6.2 Centralization Control Software IPCMonitor is a free software offered by factory, several devices on LAN and WAN can be browsed at the same time. The software also support snap, video record and so on. The below Figure 32 is the interface. Figure 32 For more information, pls. refer the <> in CD. 6.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels It is compatible with VLC 1.1.12 version or above. Please use below URL to visit: rtsp://ip:port/11 (View the video under first stream) rtsp://ip:port/12 (View video by second stream) The PORT is RTSP port, please refer to the settings of Figure 16.