User's Manual

H Series IP Camera User Manual –with Pan/Tilt of Mega pixels
15
5.2.2 WIFI Setting
Figure 17
Please use the network cable to connect the device into Internet before doing settings of
wireless connection. Please follow the above 1-4 steps to do the settings, then click
“ apply” to save the settings. You can also check the wireless network is connected
successfully or not by clicking “ Check” button. When the wireless is connected
successfully, power off the device and reboot it, then the wireless network will work
perfectly.
5.3 Alarm Setting Page
5.3.1 External Alarm Input
Figure 18