User's Manual

http://www.wansview.com
After correct setting FTP server, you can use “upload Image Periodically” function. Even
no alarm, device can also send the snap image to FTP periodically.
In order to use FTP function, user should apply username and password on
the FTP server first. And please apply some storage, and the authority to write
and create sub-category into it.
7.2.4 Alarm Server
Figure 21
Please confirm if you have connected to alarm server. The alarm message format as
follow:
GET /api/alarm.asp？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)&
io=0
Alarm server need develop by customer , user can extend other functions on this server ,
like SMS , MMS alarm , and mobile phone etc .
7.3 Advanced
7.3.1 User Setting
There are three levels of authority; they are Administrator/Operator/Visitor. Administrator
have the highest authority, it can do any change to the settings. Operator account only
can operate the IP camera, can’t do changes to the settings, and please refers to Figure
23. Visitor account only can watch the video, can’t do any operation to the IP camera,
and please refers to Figure 24. By default, the administrator’s user name is admin,
password: 123456.
Figure 22
19