User's Manual

Z series IP camera user manual

5.2.2 WIFI setting

WiFi setting interface as fig. 11, please set the WiFi as following step:

Fig. 11

1) Tick “Enable Wi-Fi”，click “Apply” to save the settings, then restart the device

2) Click “Search Wi-Fi”, pop up search dialogue;

3) Click “search” it will list all searched WiFi signal;

4) Choose WiFi signal you want to join in, click “Select” button and close search

dialogue;

5) In key blank, fill in encryption password of selected WiFi;

6) Set WiFi IP address(obtain automatically by default) , then click “Apply” to save the

setting;

7) Unplug the cable, Wifi connection is done.

Notice：

 Because WiFi uses common channel, it is vulnerable to interference from other

wireless signals, and different environment (such as open place or buildings), the

transmission distance will be different, please pay attention to the reliable distance

to ensure work properly. When searching signals, please use the signal with

intensity value above 30%.

 WIFI supports 802.11b/g/n.

5.2.3 Alarm setting

Alarm setting interface as fig. 12, it can set alarm parameters.