User's Manual

Z series IP camera user manual
6
the router, after matching successfully, you can connect it to wireless router by WIFI.
Notice：
Due to different kinds of the router, and many old router don’t support WPS/QSS, so we are
not sure our camera can be connected to all routers successfully, need to use network cable
to connect camera and router at first, and then refer to user manual of mobile phone, or
content of this manual to set Wifi (chapter 5.2.2), and then unplug the cable to use the WiFi
connection.
3. View video by PC Client Software
There are 2 steps to view by PC:
1. Install LiveIPC software
2. Register an account
3.1. Register account
Before viewing video by PC, run LiveIPC software in CD, it will install viewing video program
into your computer, launch the software, the login interface as fig.2
Fig. 2
Click “Register account”，pop up register account dialogue, fill in correct account information
as fig. 3, and then click “Submit” to finish registering new account. Detail as below:
 EID/VCODE：see the label at the bottom of the item;
 User ID：Set a user name for remote login（4 to 15 letters with numbers, and the user
name is unique one, should be not same as others’, otherwise the registration will
be not successful）；
 Password and confirm password：Set login password for the user（only 4 to 15
letters and numbers, otherwise the register is unsuccessful）；
 E-mail：Fill in your E-mail address, it is used for sending password to the E-mail when