User's Manual

Z series IP camera user manual
9
Fig. 5
It displays the function of the icon when moving the cursor to each icon in the window，
click the corresponding icon to control the device.
These buttons can be used for setting and calling PTZ preset position,
you can use right-click to click these buttons when moving the PTZ to some place, and then
select “set” or “clear” preset place in pop-up. Also you can call the PTZ preset position when
clicking these buttons by right-click.
The button is used for setting PTZ place you need when the camera start. (Notice: Only
720P cameras support the function.)
Notice：
 Only online camera can be viewed video. You can select a device in fig. 4,
right-click to open video.
 Due to network environment, some online camera maybe can’t be visited, so you
need to improve network environment (add network bandwidth, not to use in
complex network environment).