Charge the Receiver for 3 hours with the cable in package box and take off the battery separator in the Remote Transmitter compartment. Make your dog sit down and fit the Receiver to your dog by leaving one finger space between the collar and your dog’s neck.
Turn on the Receiver by pressing and holding the Power Button for 2 seconds. Toggle the Power Button up to turn on the Remote Transmitter.
Warning Tone Command: press the Warning Tone Button and the Receiver will delivery warning tone. Press the Level Button to adjust the warning tone levels. Vibration Command: press the Vibration Button and the Receiver will delivery the vibration. Press the Level Button to adjust the Vibration levels.
Shock Command: press the Shock Button and the Receiver will delivery the static shock. Press the Level Button to adjust the shock levels.
Switch the channels by pressing the Chanel Button. This product is able to train 2 dogs at the same time. Pair the product to an extra Receiver: press the Power Button on the Receiver 3 times till you hear a beeping, then press any one of the Warning Tone, Vibration or Shock Button and the Receiver will respond respectively.
Important Safety Information: WARNING Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. • For use with dogs over 6 months of age and over 8 lbs. • DO NOT use when the dog or the collar is/are wet.
I. Package Content Remote Transmitter Receiver Collar Charging Cable Wrist Lanyard User Manual Test Bulb Tool Metal Prongs Silicone Caps I.
Receiver Speaker Contact Points Charging Jack Indicator Power Button How the System Works The Remote Training Collar is easy to use with an advanced digital display that tells you exactly what level of stimulation you are using. The Remote Training Collar assists you in controlling your dog without a leash. At the push of a button, your remote sends a signal activating your dog's Receiver. He receives a safe but annoying stimulation.
Transmitter. +展示打开遥控器开机按键图片 Turn on the Receiver by pressing and holding the Power Button for 2 seconds. +展示按压接收器电源键的图片 III. Training Modes(功能演示/测试) 1. Warning Tone Mode Press the Warning Tone button and Receiver will deliver a warning tone. It will cut off automatically if you press and hold the Warning Tone button for 10 seconds. There are total 8 levels of Warning Tone for training which you can adjust by the Adjustment button. +操作声音按键的图片+调节按键的图片 2.
contact is consistent. 4. The Receiver should fit snugly, yet loose enough to allow one finger to fit between the strap and your dog's neck (C). 5. Allow your dog to wear the collar for several minutes then recheck the fit. Check the fit again as your dog becomes more comfortable with the Receiver. 6. How to attach the collar to the Receiver ? CAUTION: Risk of Skin Damage. Too long time or too tight fitting may cause pressure necroses, which if ofen misidentified as burns.
Tips: The Receiver is paired up to Remote Transmitter in Channel 1 by factory default setting, If you buy a new Receiver, you follow above pairing instruction to pair up to channel 2. The system can pair up to 2 Receiver in 2 different channels. If you can not pair the device successfully, it maybe caused by the signal interference. Please try in a new place or contact with our service center. VI.
How to Maximize the distance? Terrain, weather, vegetation, transmission from other radio devices, and other factors will affect the maximum range. Hold the Remote Transmitter in a horizontal position away from your body to achieve optimum range. For Maximum signal strength, keep the device properly charged. 此图 P30 说明书上有 *Avoid touching the antenna or the range may decrease substantially.
Trouble Shooting 1. My dog does not respond when I press a button. • Make sure the Receiver has been turned on. • If your range has reduced from the first time you used the Remote Training Collar, the battery(s) may be low in either the Remote Transmitter or Receiver. • Many factors can impact the amount of range you have with the Remote Trainer. For a list of these factors, see "How the System Works". • Test the Receiver. See "How to test the functions" for details. • Increase the Stimulation Level.
However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver.