User's Manual

–10––9–
–11–
–13–
–End–
–14–
6.2 TURN ON THE PARENT UNIT:
*Only use the A/C adapter included in this package (5V, 700mA);
*The parent unit is supplied with a built-in rechargeable Li-ion baery.
We suggest to connect the monitor to the adapter plugged into the mains
whenever possible, in order to keep the baery charged;
Press and hold the power key on the le side of the parent unit;
Once parent unit turned on , the power LED will light up and the image will
display on the LCD screen;
7.0 OSD MODE OPERATION
7.1 PARENT UNIT SCREEN ON/OFF
Short press the power key to turn on / off the screen.
7.2 VOLUME ADJUSTMENT
Press the UP key to increase the volume;
Press the DOWN key to decrease the volume;
7.3 BRIGHTNESS ADJUSTMENT
Press the Le key to decrease the brightness;
Press the Right key to increase the brightness;
7.4 DIGITAL ZOOM & PAN / TILT
Press and hold Zoom/Camera around 2 seconds to operate Zoom in / out;
At the Zoom mode , press the navigaon key to Pan/Tilt the image;
During digital zoom mode, the zoom icon will be displayed on the top of screen.
Warm reminder: If you want to adjust the volume/Brightness, you have to exit the
Zoom mode before your operate it.
7.5 CAMERA VIEW / SCAN
(only have paired two or more cameras then have this funcon)
Press Zoom/Camera key to view / scan camera;
During scan mode, the scan icon will be displayed on the top of screen.
And each cameras' video will be stay on the LCD around 10 seconds then change
to next camera;
7.6 TALK TO BABY
To talk, press and hold the talk key on the front of the monitor.
Release the buon when you have finished talking to listen the sound from
the baby's room again . Bear in mind that you can't listen to your baby whilst
you're talking to them; to listen to it, you have to stop pressing this buon.
7.7 Lullaby playing
Press lullaby key to start / stop lullaby
7.8 INFRARED NIGHT VISION(Automac)
The infrared night vision funcon allows the camera to pick up images of your
baby or the monitored area in dark or low light condions.
In this mode, only black and white images will be displayed on the monitor ,
the opmum image is 6 feet distance between baby unit and object.
ECO
8. MENU OPERATION
8.1 ECO SET TING
This mode allows you to control the sound acvaon of your baby monitor.
The ECO default seng is OFF. If there is no sound around the camera within 30
Seconds, it will stops transming.
The monitor screen turns off when the ECO model was acvated.
When the camera detects the sound is louder than set sensivity level ,
Then the monitor will be wake up ;
To change the ECO level, please follow the next instrucons:
1. Press the Menu / OK key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the the ECO icon is
highlighted then press UP key or DOWN key to select desired level;
3. Press Menu / OK key to confirm;
8.2 ALARM SET TING
You can use the alarm to remind yourself to feed baby /change diapers /
sleep, etc.
1. Press the Menu/OK key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the alarm icon is highlighted;
3. Press UP key to decrement or press DOWN key to increment ;
4. Press Menu/OK key to confirm;
Note : If the alarm is ringing and no one to answer, then the ringing will last
1 minute and then stop , aer 3 minutes the ringing will start again.
The ringing will sound up three mes total if no one answer.
8.3 LULLABY SETTING
You can soothe the baby to sleep by playing a gentle lullaby from the baby unit.
1. Press the Menu/OK key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the lullaby icon is highlighted;
3. Press UP key or DOWN key to select;
4. Press Menu/OK key to confirm;
8.4 PAIRING THE CAMERA AND MONITOR
1. Press the Menu/OK key then the menu will pop up;
2. Press the LEFT key or RIGHT key unl the camera icon
is highlighted then press UP key or DOWN key to select the desired
camera to pair;
3. Press Menu/OK key to start the pairing ;
4. While the LED is flashing then press the PAIR buon on the back of camera;
5. Once paired, then the screen will display the image from the camera.
6. If unsuccessful, please repeat above steps.
8.5 TEMPERATURE UNIT SETTING
1. Press the Menu/OK key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the temperature icon is
highlighted;
3. Press UP key or DOWN key to select between or ;
4. Press Menu/OK key to confirm;
℃
℉
9. TECHNICAL DATA
9.1 System General
Frequency
2.4G Hz FHS S
Type of Moduiaon
GFS K
Operaon Environment
Indoor use only; Temperature: 0-40 °C ;
Humidity: 5% to 90% rh. ( relave humidity)
Operang Range
Up to 900 feet (straight line and open space)
Power adapter
Input: 100-240VAC 50 / 60Hz,200mA Max;
Output: 5V, 700mA;
LCD
2.4'' TFT LCD
Rechargeable
baery for monitor
Model:503450;
3.7V, 950 mAh, 3.515Wh ;
Operang me with
baery fully charged
(parent unit)
Up to 12 hours (ECO on)
IR LED Type
940 nm
No recepon on
the monitor
*The power adapters may not be properly connected;
*Confirm that the camera and monitor are ON;
*Camera may be far away from the monitor;
*Camera and monitor may not be properly paired;
follow PAIR ING instrucons;
*Restart Baby unit and Parent unit;
*Press the reset key at the back of Parent unit;
Interference or
poor recepon
*Move the monitor close to the camera;
*The camera or monitor may be placed too close to
many metal objects;
*Other electronic devices may be interfering with the
signal;
*The baery power may be too low;
*Restart Baby unit and Parent unit;
*Press the reset key at the back of Parent unit;
Feedback
(screeching,
stac)
*The camera and monitor may be too close together;
*The volume on the monitor may be set too high;
*Press the reset key at the back of Parent unit;
10. TROUBLE SHOOTING
Cannot hear the
baby on the
parent unit
*Volume seng may be too low;
*Press the reset key at the back of Parent unit;
Image frozen
*Restart the baby unit (plug out the adapter then plug
it into the socket again);
*Press the reset key at the back of parent unit (hide
behind the stand);
11. MAINTENANCE
*Clean the surfaces of the camera and monitor with a so, fluff-free cloth;
*Never use cleaning agents or solvents;
*If the units become dirty, use a lightly dampened cloth to wipe surfaces,
taking care to not allow water into any openings.
If anything else is needed, please feel free to contact us at
12. INFORMATION ON DISPOSAL OF BAT TE RY AND PRODUC T
*Do not aempt to repair or adjust any of the electrical or mechanical funcons of
the unit;
*Remember to dispose of the product in an environmentally responsible way;
*For proper collecon and processing of these products, take them to the collecon
points designated by local authories. You can also contact the store where you
purchased the product.
All rights reserved
The features described in user’s manual are subject to
modifications without prior notice.
WARNING:
Keep the small parts away from children
Printed in China
–12–
–8–
www.goodbaby.top
Service:[e-mail]
Image sensor type
1/6.5'’ Color CMOS image sensor