Bluetooth Speaker User Guide X3
Power ON/OFF Operation Charging the speaker before first use is recommended. Hold power button down for (3) seconds to turn on / off the device. There will be sound effects when you turn on / off the speaker. The speaker powers off after 5 minutes of inactivity.
Bluetooth Connection Operation X3 Open and enable Bluetooth on your device. (phone, tablet...) Look for "X3" and select it on your phone / tablet screen. Wait for Bluetooth to connect and listen to the successful pairing prompt. Bluetooth will auto connect when turned on if previous established connection was not overridden by a different device.
Keys Function Operation Button Operation: Quick Press: It refers to a quick depress of the button, do not hold. Holding: Hold the button down for specified amount of time. Pause/ Play Quick Press to pause and play music. Press and hold it to disconnect Bluetooth Connection. When a call comes in: 1 .Quick Press to answer call. 2 .Quick Press again to end call. 3 .Quick Press twice to reject call. Quick Press twice to redial last phone number.
Keys Function Operation Quick Press to switch to next track.(Available only in Bluetooth) Press and hold it to turn up the volume.
Keys Function Operation Press to switch to previous track or beginning of the track. (Available only in Bluetooth) Press and hold it to turn down the volume.
LED Indicator Light: RED RED BLUE/RED BLUE (Flashing): (Solid): (Flashing): (Solid): Charging Fully Charged Ready to Pair / Pairing Bluetooth / AUX mode 6
Microphone Hole 30c m For better sound quality, please keep the device no more than 30cm away from you. Calling from the same room may cause interference in sound quality.
Side Interface Diagram AUX audio input Reset switch Micro-USB charge port 8
AUX IN Connect the device to an audio source via audio cable. There will be a sound when connected successfully. The device will play the music from the audio source.
Reset Switch Press the reset switch with the help of a paper clip to reset the device.
USB Interface The device can be charged when it is connected with DC-5V 1A charger via USB cable. Charging is possible through: Computer, Power Bank, Car Charger, Wall plug. Charging through PC's USB port is generally the slowest method.
Package Contents X3 3.
Technical Data Bluetooth Version 2.1+EDR Frequency response 80Hz to 18KHz Output power 4.5W Maximum SPL Impedance 4Ω Net weight 195g Dimension L86*W34.5*H86mm Battery Li-ion battery 3.
! ● Important Safety Instructions Study this user guide carefully before using this speaker ● Keep speaker away from high temperatures.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
