Quick Start Guide Bluetooth Speaker
Power ON/OFF Operation 1 Charging the speaker before first use is recommended. Hold the button for 3 seconds to turn on / off the device. Speaker will make a sound when powering on / off. Speaker will power off after 5 minutes of inactivity.
Bluetooth Connection Operation X6 2 Bluetooth Pairing: First Pairing (a) (Can use the reset button to clear any existing connections) 1) Turn on Bluetooth on phone/pc/tablet/etc... 2) Turn on Speaker (Make sure speaker has power) 3) Search for Bluetooth signal name: X6 (On your device) 4) Tap on X6 on the screen Android users may need to reset phone if both channels are unable to connect. Connect the speaker with your mobile device via Bluetooth. Short Press button to answer the phone call.
Keys Function Operation 3 Pause/ Play
Keys Function Operation 4 Quick Press (less than 1 second) to switch to the next song. Press and hold to increase volume.
Keys Function Operation 5 Quick Press (less than 1 second) to switch to the previous song. Press and hold to decrease volume.
Indicator LED Lights 6 Charging............ Pairing............... Paired................ Fully Charged....
Microphone Hole 7 30c m To improve call quality, stay within 30cm from the microphone. Calling from the same room may cause interference in sound quality.
Battery LED Indicators 8 Three Solid LED Indicators: Battery is fully charged. Two Solid LED Indicators: Battery capacity is around 60%. One Solid LED Indicator: Battery capacity is less than 30%. Recharging recommended.
Under the Dust Cover 9 AUX audio input Reset button Micro-USB charge input
AUX IN 10 Connect your device to the speaker with the auxiliary cable. Speaker volume buttons are functional. Pause/Play button depends upon the operating system of the phone. Auxiliary connection drains the phone's battery slower.
Reset Switch 11 Press reset button with the help of a paper clip or something similar. Reset will reset the speaker and Bluetooth connection.
USB Interface 12 It is possible to charge from a computer. Computer's USB is generally the slowest method. Charging slowly means a longer lasting battery. USB is fairly universal as most USB plugs have already been converted for 5V. Always check with power source. Charging is possible through: Computer, Power Bank, Car Charger, Wall plug.
Package Contents X6 13 3.
FCC ID: 2AECY-X6
Technical Data 14 Bluetooth Version 2.1+EDR Frequency Response 80Hz to 19KHz Output Power 3.5W+3.5W RMS Maximum SPL 88dB Impedance 4Ω Net weight 210g Dimension L145*W30 *H66.3 mm Charging time 2~3 hours Battery Li-ion battery 3.
! Important Safety Instructions ▶If do not use this speaker for long time, please charge at least once within one month, in order to prevent the lithium battery from causing and damaging because of excessive consumption. ▶Keep the speaker away from any sources of heat,and keep away from water. ▶Adjust the volume to a suitable level so as to avoid damaging your hearing, or the unit itself. ▶The red indicator will flash when the battery is low,Please charge the speaker in time.