User's Manual

Installation
1
www.SolidRFCanada.com 3
1.How it work
Step 1: The powerful outside antenna captures a voice and
data signal, and transfer it to the booster;
Step 2: The booster receives the signal, amplifies it and
rebroadcasts it by inside antenna.
Step 3: Your mobile devices get a better signal, never
experience dropped calls or slow data speed.
2. Step by step installation
Step 1: mount the outside antenna
a. Choose right position
• Find the strongest signal position in the possible install
locations by read your cell phone signal bar;
• 30cm away from any other metallic objects;
• 100cm away from any windows;
b. Mount the antenna pole;
c. Mount the antenna to the pole;
d. Connect outside cable to antenna
• Make sure connectors are screwed well;
• Seal the connectors with the glued tape;
Coverage Area
Note: cause the ability of coverage depends on output
power of booster. Any boost has a limit of amplification
factor, so finial output power is related to received signal
power level at the location of outdoor antenna.
Power level
at the outdoor antenna location
Coverage Area
(sq. ft.)
Strong (5 bars on the cellphone) 100000
Medium (3~4 bars on the cellphone) 30000
Weak (1~2 bars on the cellphone) 10000
Supported Carries
• AT&T 2G/3G/4G (HSPA+ & LTE)
• Verizon 3G/4G
• T-Mobile 2G/3G/4G
• Sprint 3G/4G
• US Cellular 3G/4G
• Metro PCS 3G/4G
• Major Canadian Carriers 2G/3G/4G
• All other carriers using 700MHz, 750MHz, 850MHz ,1900
and 2100MHz