User's Manual

Table Of Contents

www.SolidRFCanada.com 4

Installation

Step 3: arrange the booster

a. Choose position

• Be sure away from heat source;

• In ventilate dry place, temperature range should

-5~+50degree;

b. Connect the outside antenna’s connector to the “outsid-

e” labeled port of the booster;

c. Connect the inside antenna’s connector to the “inside” l

abeled port of the booster

Step 4: power on the booster

a. Plug the power adapter to the AC power;

b. Attach the cord of the adapter to the booster;

Inside antenna Outside antenna

Adapter cord

c. Connect the inside cable to the inside antenna;

Step 2: mount the inside antenna

a. Choose right position

• 20cm away from any other metallic objects;

• 50cm away from any windows;

• For the panel antenna the position on the end of the b

uilding is recommended;

b. Mount the inside antenna;

e. Set the outside antenna cable into the building

• Carefully arrange the cable along the building outside

and make sure don’t fold it;

• Fix the cable at each corner;