User Manual

Outside Antenna SR-01000200 3dBi 3.5dBi Sucker antenna
Outdoor Cable SRG174-10N 10Feet 4.2dB 8.6dB
Description of network protection features:
Description of network protection features:Description of network protection features:
Description of network protection features:
The SolidRF SR42152001 including safeguards to protect the cellular network from
interference. Each Signal Booster is individually tested and factory set to ensure FCC
compliance.
1.
1.1.
1. The Signal Booster cannot be adjusted without factory reprogramming or
disabling the hardware.
2.
2.2.
2. The Signal Booster will amplify, but ONLY
ONLYONLY
ONLY incoming and outgoing signals in
order to increase coverage of authorized frequency bands.
3.
3.3.
3. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal
is detected.
4.
4.4.
4. If a detected signal is too high in a frequency band, or if the Signal Booster
detects an oscillation, the Signal Booster will automatically turn the power off on
that band.
5. For a detected oscillation the Signal Booster will automatically resume normal
operation after a minimum of 1 minute. After 5 times consecutive such automatic
restarts, if the detected oscillation still remains, any problematic bands are
permanently shut off until the Signal Booster has been manually restarted by
reconnecting power supply to the Signal Booster.
6. Noise power, gain, and linearity are maintained by the Signal Booster’s
microprocessor.