Product Diagram

ManualsBrandsShenZhen SolidRF Communications ManualsComputers & AccessoriesSignal Booster

SolidRF TRUE5‐Afor

2G/3G/4Gand4GLTE

Manual

If

ouhavean



uestionsorconcernswhen

Product Diagram

y y q

installingoroperatingyourcellphonebooster,

pleaseemailus:

Support@SolidRF.ca

Pleaseprovidetheinvoiceofyourproductin

your email Or visit www SolidRF ca for more

Product



Diagram

PackageContents

Features

TestInstallation

Illi

S B S

your



.



visit



www

SolidRF



for



information.

SystemstestedandcertifiedagainstFCC

standard,EquipmentClass:Part20Wideband

ConsumerBooster(CMRS)

nsta

on–

tep

y

tep

TechnicalSpecification

SelfOscillation

SystemstestedandcertifiedagainstICstandard,

TypeofEquipment:Amplifier,RSS‐131

QuickTroubleshooting

FindStrongestSignal

ManufacturedandWarrantedby

SolidRF TechnologyInc.Canada

www.SolidRF.ca

Summary of content (13 pages)

PAGE 1
SolidRF TRUE5‐A for 2G/3G/4G and 4G LTE Manual If yyou have anyy questions q or concerns when installing or operating your cell phone booster, please email us: Product Diagram Package Contents Features Support@SolidRF.ca Test Installation Please provide the invoice of your product in your email email. Or visit www.SolidRF.ca www SolidRF ca for more information.
PAGE 2
Product Diagram INDOOR UNIT Cable Connector OUTDOOR UNIT C bl Connector Cable C Package Contents • • • • Outdoor Unit Indoor Unit LM240 Cables: 1 x 45 feet Power Adapter Indoor Unit Outdoor Unit LM240 Cable Power Adapter Features • • • • • • • • • Greatly reduces dropped calls, extends signal range, and increases data rates Allows multiple mobile devices to be used simultaneously Oscillation (or interference) detection and automatic shutdown Overload protection circuit – protects cell towers from bein
PAGE 3
Test Installation We STRONGLY recommends doing a soft install before the formal installation. Doing a test installation of a cell phone booster allows to get best optimal system setup. Step1: Find the strongest signal, setup outdoor antenna with cable screwed Affected by terrain and signal propagation characteristics. More higher of the outdoor antenna will get better signal. Find the best signal around the house by checking the bars of the cell phone.
PAGE 4
Step3: Introduce cables into room Attention: Don’t excessive bending of the cable, otherwise it will be damaged and loss functions functions. Step4: Setup booster 1. Connect cable to outside connecter make sure connecter, s re pin of the cable head smooth import connecter’s socket, and then screw well till the end; 2. Plug in power cord; 2 1 Step5: Power on and evaluate effects 1. Power on booster; 2. Observe the flashing status of “ALARM” lights; 3.
PAGE 5
The Formal Installation OUTDOOR Unit INSTALLATION a. Choose right position: 30 cm away from any other metallic objects, and 100 cm away from any windows b Mount b. M t th the antenna t as the th picture i t shows h c.
PAGE 6
Recommended Installation Position ARRANGE BOOSTER a. Choose right position • Be sure to be far from any heat source • In a ventilated dry place, temperature range should be from ‐ 25 Ԩ to +50 Ԩ b Mount the b.
PAGE 7
ATTENTION: Self Oscillation We strongly recommend it must achieve the Minimum Required Separation Distance for the installation The improper installation could result in possible Self Oscillation installation. Oscillation. Minimum Required Separation Distance (MRSD)：6 meters (20 ft ) distance and 4 meters ( 13 ft ) vertical height distance.
PAGE 8
Quick Troubleshooting Correct functioning: • Power Light should be solid green • Every time the booster is powered on, the Status Light will be lit in red for several times. It will turn off eventually. • Status Light is off (no mobile devices are in use) or flashing (one or more mobile devices are in use).
PAGE 9
20
PAGE 10
ＦＣＣＳｔａｔｅｍｅｎｔ：
PAGE 11
ＩＳＥＤＣＳｔａｔｅｍｅｎｔ： Safety Guidelines To uphold network protection standards and ensure compliance, all active cellular devices must maintain a separation distance of at least six feet between the inside unit antenna and outside unit antenna and at least four feet of separation distance from the inside unit. Use only the power supply provided in this package. Use of a non‐SolidRF product or accessory may result in damage to the equipment or components of the equipment.
PAGE 12
Antenna Kitting Information Gain/Loss Component Type specification Outside id Cable bl Outside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Inside Cable Outside Antenna LMR240 45Feet SRLMR400‐30NN 30Feet RG6FF 90Feet RG6FF 75Feet RG6FF 60Feet RG6FF 45Feet LMR240 90Feet LMR240 75Feet LMR240 60Feet LMR240 45Feet SRLMR400 30NN 30Feet SRLMR400‐30NN SRLMR400‐75NN 75Feet SRG58‐30FN
PAGE 13