User's Manual

ZBB ridge

已添加遥控器:0

暂无遥控器，请添加

添加

>20mm

3. Add sub-devices

Connect the Bridge before adding the sub-device.

If the addition failed, move the sub-device closer to the Bridge

and try again.

Access the eWeLink APP and select the Bridge, tap "Add" to

select the alarm, and a "Beep" means the Bridge enters the pairing

mode. Then seperate the magnet for more than 20 mm from the

transmitter until the LED indicator stays on for 1 to 2s, and the

pairing is complete when you hear "Beep Beep".

Install the device

1. Tear oﬀ the protective ﬁlm of the 3M adhesive.

Shenzhen Sonoff Technologies Co.,Ltd.

English