User manual V1.
Operating Instruction 1 Download the APP Please refer to the user guide of hub to download the corresponding APP, below platforms are recommended: SmartThings Amazon Alexa 2 Hub connection Set the hub according to user guide. HUB Support ZigBee hubs as follow: echo studio Echo Plus (model: ZE39KL) 2nd Gen Echo Show (model: DW84JL) 2nd Gen Echo Plus (model: L9D29R) Samsung SmartThings hub If the connection fails, please move the hub closer to your phone and try again.
Power on After powering on, the device will enter the pairing mode during the first use and the LED signal indicator flashes. The device will exit the pairing mode if no next operation for a long time. If enter again, please long press the manual switch for 5s until the LED signal indicator flashes and release. 4 Add the device Add devices according to the prompt on the APP, note that you should choose eWeLink or SONOFF.
Specifications Model S31 Lite zb Input 120V AC 60Hz Output 120V AC 60Hz Max. Load ZigBee Material Dimension 15A/1800W IEEE 802.15.4 2.
Features S31 Lite zb is a smart Plug that adopts ZigBee wireless protocol and connect to your internet through the ZigBee hub. You can turnon/off, schedule on/off and share the device with your family to control together and so on. Remote Control Timing Schedule Voice Control Share Control Smart Scene LAN Control Factory Reset Long press the con guration button for 5s until the LED signal indicator ashes and release,then the reset is successful. The device enterspairing mode.
FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
— Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Scan the QR code to read the voice control instruction for Amazon Echo and Google Home. Scan the QR code or visit the website (https://www.sonoff.tech/usermanuals) to check the lastest user manual.
Shenzhen Sonoff Technologies Co., Ltd. Room 1001, 10F, Building 8, Lianhua Industrial Park, Longyuan Road, Longhua District, Shenzhen, GD, China https://sonoff.
LIKE IT! Glad to know you are satisfied with SONOFF products. It would mean a lot to us if you can take a minute to share your buying experience.
HAVE A PROBLEM? We are so sorry for the inconvenience caused by the product. Please contact us for help via the email address below. support@itead.cc We will get back to you as soon as possible.