SNZB-03 User manual V 1.
本设备需要连接SONOFF ZigBee网关进行智 能操作，可与其他产品互联互通。 设备支持其它同类型的网关，具体以实际产品为 准。 取出电池绝缘片 > 使用说明 1.
2.
SONOFF网关支持同时连接多个子 设备 添加设备 ZBBridge 正在连接 已添加设备:0 请让设备尽量靠近网关 暂无子设备，请添加 添加 > 25s 找到设备 3个设备 已找到 先打开eWeLink APP网关页面，点击添加， 然后设置让所需配对的子设备进入配对状态， 等待设备连接。 3
安装方法 方法1：直接放置桌面使用。 方法2：撕下3M胶保护膜，粘贴在所需区域即可 注意：请勿安装在金属表面，否则会影响无线通讯 距离。 4
产品参数 产品型号: SNZB-03 电池型号: CR2450 工作电压: 3V 无线协议: ZigBee (IEEE 802.15.
产品特点 SNZB-03是一款低功耗的运动传感器，可实 时感应当环境是否有移动物体，通过添加场 景联动设置控制其他设备。 低功耗 移动感应 电量低消息推送 场景联动 删除子设备 长按子设备重置按钮5秒直到LED指示灯闪烁3 下，此时子设备已在网关中删除。 提醒：用户还可在APP子设备界面中删除子设备。 6
The device can be operated intelligently via working with the SONOFF ZigBee Bridge to communicate with other devices. The device can work with other gateways supporting ZigBee 3.0 wireless protocol. Detailed information is in accordance with the final product. Pull out the battery insulation sheet > Operation instruction 1.
2. Add sub-devices Connect the Bridge before adding the sub-device ZBBridge Added:0 No child device,please add. > Add Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” to add a sub-device. Then long press reset button on the device for 5s until the LED indicator flashes three times, which means the device has entered the pairing mode, and be patient until pairing completes. If the addition failed, move the sub-device closer to the Bridge and try again.
SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same time. ZBBridge Add Device Connecting Added:0 Keep the device close enough to the hub. No child device,please add. Add > 25s Looking for device 3 devices Found Power the Bridge on, access the Bridge page in the eWeLink APP, and tap “Add”. Then set the sub-device to be pair to the pairing mode, and be patient until thepairing completes.
Installation methods 1. Placed on the desktop for use. 2. Tear off the protective film of the 3M adhesive and stick the device on the desired area. Do not install on the metal surface, otherwise it will affect the wireless communication distance.
Specifications Model: SNZB-03 Battery model: CR2450 Working voltage: 3V Wireless connection: ZigBee (IEEE 802.15.
Features SNZB-03 is a ZigBee low-energy motion sensor that can detect the movement of objects in real time. Connect it with the Bridge and you can create a smart scene to trigger other devices. Low-energy Movement detection Low battery notification Smart scenes Delete sub-devices Long press the reset button on the sub-device for 5s until the LED indicator flashes three times. In this case, the sub-device is deleted from the Bridge successfully.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
