User Manual

ManualsBrandsShenzhen SQT Electronics ManualsComputers & AccessoriesBT three-mode mechanical keyboard

SK-053TM Manual：

(BT three-mode mechanical keyboard)

1：Basic Function

.1.1 3 Channel bluetooth + 2.4G + Wired illuminated mechanical keyboard

1.11: Press FN+PGDN (BT1)/END (BT2) to 2 Bluetooth mode;

1.12:Plug nano receiver to USB port and Press FN+PGUP to 2.4G mode

1.13:Plug USB cable and press FN+HOME to wired mode;

1.14： If change to wired mode( Pls make sure USB cable in USB port), press FN+HOME, LED light under

HOME button will flash slowly around 3-5 sec., once connected, LED will be off.

If change to 2.4G mode( Pls make sure nano receiver in USB port), press FN+PGUP, LED light under PGUP

button will flash slowly around 3-5 sec., once connected, LED will be off.

If change to bluetooth mode, press FN+PGDN(BT1)/END(BT2),LED light under FN+PGDN

(BT1)/END(BT2),button will flash slowly around 3-5 sec., once connected, LED will be off.

1.15： Under Bluetooth Mode, when you press FN+PGDN to BT1 (FN+END to BT2, ) around 3sec.（Searching

time up to 3 mins), the white LED will flash quickly, then search bluetooth device, which named: K840T Keyboard BT,

then connected;

1.2:Under Bluetooth mode, Press FN+Q/W/E to change Android /Windows/iOS system;

FN+W (Default setting)

(Windows)

Press FN+F1.2.3... realize hotkey

function)

FN+E

（iOS)

FN+Q

(Android)

Cut

Copy

Paste

Lauguage Switch Lauguage Switch Lauguage Switch

Search Search Search

Previous Track Previous Track Previous Track

Play/Pause Play/Pause Play/Pause

Summary of content (7 pages)

PAGE 1
SK-053TM Manual： (BT three-mode mechanical keyboard) 1：Basic Function .1.1 3 Channel bluetooth + 2.4G + Wired illuminated mechanical keyboard 1.11: Press FN+PGDN (BT1)/END (BT2) to 2 Bluetooth mode; 1.12:Plug nano receiver to USB port and Press FN+PGUP to 2.4G mode 1.13:Plug USB cable and press FN+HOME to wired mode; 1.14： If change to wired mode( Pls make sure USB cable in USB port), press FN+HOME, LED light under HOME button will flash slowly around 3-5 sec., once connected, LED will be off.
PAGE 2
F8 Next Track Next Track Next Track F9 Mute Mute Mute F10 Volume Down Volume Down Volume Down F11 Volume Up Volume Up Volume Up F12 Screen Screen) Lock (Black Screen Lock Screen) (Black Screen Lock Screen) (Black For code: FN + Prtscn Scrlk/Pause long press on the code (white light slow flash), short press for channel switching. 1.3: On/OFF switch(Press to ON status under 2.4G or Bluetooth mode) 1.4. 2.4G nano receiver on Keyboard bottom case; 1.
PAGE 3
1.7 Keyboard size: 351.6*134.6*36.8±0.2mm 1.8 Keyboard weight:725±10g 2： Illumination Control: 1. Supporting standard gaming backlight and custom backlight function Standard: FN+1 to FN+8: fixed gaming lighting UP, FN+9/FN+0: custom SETTING; 2.
PAGE 4
Under this mode, press FN+ to change 4 levels of breathing speed; modes 3: The default backlight is lightening. When the button is pressed, the backlight LED of the corresponding button is turned off. After the button is released,The backlight of the keys lights up for a delay.
PAGE 5
modes 9: The backlight is off, and by default, each time a key is pressed, the line of keys lights up. Under this mode, press FN+ to 5 levels of brightness adjustment Under this mode, press FN+ to change 4 levels of breathing speed; modes 10:The default backlight is off. When the button is pressed, the corresponding button of LED will be lighted. After releasing the button, the backlight will be off.
PAGE 6
modes 14: The backlight is running to and fro which is separated by two lines. Under this mode, press FN+ to 5 levels of brightness adjustment Under this mode, press FN+ to change 4 levels of breathing speed; modes 15:The backlight runs from upper left to right corner to whole keyboard, and runs again from upper right to left corner to whote keyboard.
PAGE 7
Light custom Settings: FN+INSERT = Record / FN+Delete = Save Press FN 9+ or FN + 0 into corresponding custom mode. Press FN+INSERT to enter the custom recording status. Press any key to turn on or turn off to the specified state, and press FN+Delete to save. Press FN +ESC clear light recording, restore lightening mode. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.