User Manual

modes 9: The backlight is off, and by default, each time a key is pressed, the line of keys lights up.
Under this mode, press FN+
to 5 levels of brightness adjustment
Under this mode, press FN+
to change 4 levels of breathing speed;
modes 10:The default backlight is off. When the button is pressed, the corresponding button of LED will be lighted.
After releasing the button, the backlight will be off.
Under this mode, press FN+
to 5 levels of brightness adjustment
Under this mode, press FN+
to change 4 levels of breathing speed;
modes 11: The default backlight is lightening. When you press the button, the LED will be off and spread to whole
keyboard, after that the backlight will be ON again.
Under this mode, press FN+
to 5 levels of brightness adjustment
Under this mode, press FN+
to change 4 levels of breathing speed;
modes 12: The backlight runs from ESC keys to whole keycaps one by one.
Under this mode, press FN+
to 5 levels of brightness adjustment
Under this mode, press FN+
to change 4 levels of breathing speed;
modes 13: The backlight is blinking like star. The blinking speed and quantity can be adjusted by ender user.
Under this mode, press FN+
to 5 levels of brightness adjustment
Under this mode, press FN+
to change 4 levels of breathing speed;