True Wireless Stereo Earbuds Srhythm SoulMate Series (S5) User Manual-------------------------1-７
5
English Parameters: Wireless Noise Cancelling Earbuds S5 Wireless charging and wired charging are both workable. Load impedance 32Ω Frequency range 2.402G-2.480G Battery life 1000 times Maximum noise deduction >-28dB Water proof level IPX5 Bluetooth version V5.1 Sensitivity - 94 dBm Bluetooth Support AAC,SBC,A2DP,HFP,HSP,AVRCP,etc. Charging Time (Charging Box) 1-2 Hours (Wired Charging) Operating voltage Earphone 3.
Ambient Mode(ADT Mode): Tap the touchpad of either earbud twice.Reminder voice of earbuds “ADT(Audio Pass Through) On/Off” will remind you.Normal Mode,Ambient Mode and ANC Mode,these 3 modes will be circulation. Charging to the Charging Box: Connect the attached USB Type-C cable to the USB interface(charging wall or charger that is not provided by Srhythm) and charging box under voltage 3.7V.It takes about 1-2 hours to fully charge earbuds and charging box.
Replace Silicone Earplug and Ear-tips: Need to use a certain amount of force to remove the earplugs English Align the hole in the silicone earplug with the hole in the earbuds Q&A: 1.Why can't the earbuds connect to each other successfully?/Why do I only hear the sound on one side? Here are 3 ways to connect: The First Way: Ignore Bluetooth pairing name S5, then close and reopen your device’s Bluetooth.
English PLEASE NOTE: Do not handle the earbuds roughly. Do not press them with heavy objects. Keep them clear of high temperatures, humidity and moisture. For best performance, keep away from Wi-Fi routers and other high-frequency transmitting devices. Please use the earbuds within the effective distance of 10 meters. There should be no physical obstruction (such as a wall, etc.) between the Bluetooth device and the earbuds. The earbuds can be paired with any device that supports Bluetooth.
FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
