Product Manual

10
as a specific host also approved with the module.
Explanation: this module is a Single approval module
2.5 Trace antenna designs
For a modular transmitter with trace antenna designs, see the guidance in Question
11 of KDB Publication 996369 D02 FAQ – Modules for Micro-Strip Antennas and
traces. The integration information shall include for the TCB review the integration
instructions for the following aspects: layout of trace design, parts list (BOM), antenna,
connectors, and isolation requirements.
a) Information that includes permitted variances (e.g., trace boundary limits, thickness,
length, width, shape(s), dielectric constant, and impedance as applicable for each
type of antenna);
b) Each design shall be considered a different type (e.g., antenna length in multiple(s)
of frequency, the wave length, and antenna shape (traces in phase) can affect
antenna gain and must be considered);
c) The parameters shall be provided in a manner permitting host manufacturers to
design the printed circuit (PC) board layout;
d) Appropriate parts by manufacturer and specifications;
e) Test procedures for design verification; and
f) Production test procedures for ensuring compliance.
Explanation: No. this module without trance antenna designs, use fixed-length PCB
antenna
2.6 RF exposure considerations
It is essential for module grantees to clearly and explicitly state the RF exposure
conditions that permit a host product manufacturer to use the module. Two types of
instructions are required for RF exposure
information: (1) to the host product manufacturer, to define the application conditions
(mobile, portable
– xx cm from a person’s body); and (2) additional text needed for the host product
manufacturer to provide to end users in their end-product manuals. If RF exposure
statements and use conditions are
not provided, then the host product manufacturer is required to take responsibility of
the module through a change in FCC ID (new application).
Explanation: This module complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment at a 20cm distance separation to human body. This
module is designed to comply with the FCC statement, FCC ID: 2A2X4MMJ051B015