Install Instructions
Brevo App
App Installation
1. You need a smartphone running iOS 10.0 (or above) or Android 6.0 (or above).
2. Download the Brevo app from App Store (iOS devices) or Google Play (Android devices).
3. Register for an account, then sign-in.
For more instructions about how to use Brevo app, visit brevosmart.com/support or contact customer service.
Add device
1. On the Brevo app home screen, tap the “+” icon at the top-right corner.
2. Select “Add device“ from the menu. All controllable Brevo smart lighting devices will be listed.
3. Tap the “+” icon one by one to add devices to the Brevo app.
If the app cannot nd the remote during this step, press any button on the remote to wake the remote. Or if the remote
has already been added but is not responding, press and hold the reset button on the back of the remote for approx. 5s
and try again.
Setup a Hub
1. On the Brevo app homescreen, tap the hub.
2. Follow the on-screen instructions to complete hub setup. Make sure the hub is connected to a 2.4GHz WiFi network.
Create a group
1. Go to home screen and tap the “+” icon at the top-right corner.
2. Select “Create group“ on the menu, type a group name, and save.
3. On the “Not added” tab-page, tap the “+” icon to add devices.
Program the Remote Control
1. Tap the remote control on home screen of the app.
2. Tap the “Add/Program” button at the bottom of the screen.
3. Select a channel button from 1 to 6, then tap the “+” icon at the bottom.
4. Locate the device or group you wish to control and tap “+” to conrm. Then press OK button.
5. Tap “Save” at the top-right corner, then press any physical button on the remote to complete the process.
6. Repeat the above steps to assign more channels.
Control Brevo Smart Light Devices from the Brevo App
Tap the device or the group on home to open the control settings.
• Images for illustrative purposes only. Actual images may vary.
• App content subject to change without notication.
• App content may differ from different operating system.
One Year Limited Hardware Warranty
Your Brevo Smart Lighting Kit (”Product”) includes a One Year Limited Hardware Warranty (“Warranty”). The Warranty covers
product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and
Canada only and is available only to original purchasers. This Warranty gives you specic legal rights and you may also have
other rights which vary from state to state. This Warranty starts on the date of your purchase and lasts for three years (the
“Warranty Period”). The Warranty Period is not extended if the Product is repaired or replaced. We may change the availability
of this limited warranty at our discretion, but any changes will not be retroactive. Warranty services are provided by Brevo
Warranty Pro (“WP”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to
the extent permitted by law, WP will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to
new in performance and reliability; or (2) exchange the Product with a new product or a refurbished one that is substantially
equivalent to the original product. This Warranty is for one replacement only of like-items and does not cover items out of
production if the product is no longer made or stocked. This Warranty is not assignable or transferable. The original purchaser
may call WP’s toll-free number at 1-855-229-9472 for service requests. When a product or part is exchanged, any replacement
item becomes your property and the replaced item becomes WP’s property. This warranty only covers technical hardware
defectiveness during the warranty period and under normal use conditions. WP does not warrant uninterrupted or error-free
operation of this Product. This Warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use;
(d) failure to follow the product instructions or to perform any preventive maintenance; (e) modications; (f) unauthorized repair;
(g) normal wear and tear; (h) overclocking; or (i) external causes such as accidents, abuse, or other actions or events beyond
our reasonable control.
Important: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
DISCLAIMER OF WARRANTY: THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES
AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO
CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL
WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE
DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE
DURATION OF THIS EXPRESS LIMITED WARRANTY.
FCC RELATED INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
For Hub
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
Tap to turn on/off the light.
Tap or slide to adjust the
color hue value.
Tap or slide to adjust the
saturation.
Tap or slide to adjust the
color temperature.
Tap or slide to adjust the
brightness.
Tap to select a desired lighting
preset effects/programs.
Scan the QR Code to
get more detail about
the operations