User's Manual
1. Gamepad is suitable for operation games on N-S system device.
2. Gamepad button function correspondence with Joy-Con gamepad button function,
and support TURBO (acceleration) &programming function.
3. Gamepad support Six-axis gyroscope, vibration function,it will bring player an
excellent gamimg experience.
4.The Grip Stand built-in game card storage slot, can hold 4 large game
cards and 1 Micro SD card.
Input voltage/current：DC5V/500mA；
Working current：DC3.7V；
Battery capacity：400mAh；
Working time: >10H；
Charging time：About 3H；
BT3.0，Transmission distance：≤8M；
Cat Fairy Joy-pad for N·S
User Manual(PG-SW067)
Product Application
Product button function
Electrical Parameters
Function and operation
Charging instruction
Notes:
1.Do not store product in humid or high temperature places；
2.Do not knock, beat, puncture, or try to disassemble to avoid unnecessary damage to the
product；
3.Do not throw away with garbage because product has built-in battery；
4.Do not charge gamepad near fire or high temperature.
5.Non-professionals disassemble this product by mistake otherwise it will not be cover by
the after-sales warranty service；
Included：
Manual x1Left gamepad x1 Right gamepad x1 USB cable x1Grip stand x1
Grip Stand
(Game card storage)
Type-c port Type-c port
D-pad
capture
button
Left 3D
joystick
Right 3D
joystick
A/B/X/Y
button
Turbo
Turbo
button
L/ZL button
SL
SR
Console data port Console data port
“-”button “+”button
R/ZR button
HOME
LED
Pair button Pair button
N-S console connection
Gamepad and N-S separate connection operation：
Connect the gamepad to the console for the first time：turn on N-S console，In the
console main menu interface, use finger touch and click:gamepad icon→ change
grip/sequence，Enter the console pairing mode interface.
When gamepad turn off, press pair button for 2 seconds to turn on gamepad pair search
mode, gamepad LED began to run with flashing lights,when single or multiple LED are
always on,gameapd and console paired search success,N-S console screen appears
with two gray gamepad rotating, then press the left and right gamepad L and R button
together, N-S console screen gray gamepad become black gamepad，Press A to
complete the pairing and press HOME to exit the interface.
Connect the gamepad to the console again：The gamepad will go to sleep if not used
within 5 minutes,When the gamepad need to be reused，Except TURBO button,
programming button and 3D joystick,Short press other buttons to wake up reconnect and
pair.
Gamepad into N-S console connection operation：
When gamepad turn off, insert the left and right gamepad directly into both side rails of the
N-S console and snap them in place,gamepad automatic pairing.
TURBO Function
Action function include 13 buttons(A/B/X/Y/R/ZR/SR/SL//L/ZL/SL/SR/十button) ，all can set
TURBO function by manually；
Setting method：long press action button at the same time press TURBO button,turn on TURBO
function；press action button at the same time press TURBO button, turn off TURBO function；
After the product disconnection，previous set TURBO function it will automatic cleared,If TURBO
function is enabled must be reset.
Programming function
1. Left gamepad programming：press“programming
button” + “ - ”button for 3 seconds ，the motor
began to vibrate and release the hand（Vibration
stops for 2 seconds），Short press the function
button to be entered，the programming button is the
button function just entered.
Notes:3D，TURBO，Capture button and pair button
can't programming.
2. Right gamepad programming：press “programming button” + “ + ” for 3 seconds，motor
began to vibrate then release the hands（Vibration stops for 2 seconds），Short press the
function button to be entered，the programming button is the button function just entered.
Notes：3D，TURBO，HOME button and pair button can't programming.
Gamepad and N-S separate connection operation：
①Gamepad power not enough the LED light will flash quickly.
②Single gamepad charging：adapter output DC5V500mA the USB cable TYPE-C port plug
in gamepad TYPE-C port to charging.when turn off to charging 4 LED light flash, if connect
success to charging correspondence light flash, fully charging is always on.
③N-S console charging：the left and right gamepad are install on both sides of the N-S
console and insert in place，N-S console will automatic detect gamepad power.When detect
gamepad Low power will automatic charge for gamepad.
When N-S console battery is low power,Charge N-S console with original N-S charger，
original USB TYPE-C charge plug in N-S TYPE-C console to charging.
programming button
SR
SL
LED
Lock button 1 Lock button 2
PIC 1
*Notes：At the STITCH console data port, cannot be used other charger for charging,
otherwise our company is not responsible for the damage.so please follow the charging
instructions ②③method.
Original N-S charger