User's Manual

TIPS: Users are recommended to use the default and not to alter the network setting rashly. The

ex-works set defaults have been adjusted to the optimum status. Advanced level users can set upon

their conditions.

4.5 Keyboard

Double click “Keyboard” icon on “Control panel” and the following interface will

appear.

This is much the same as the function of “keyboard” in “Control panel” of PC. The

function is mainly used to adjust the repeat input of soft keyboard and the setting of

repeat delay time. A test dialog is available as shown below to test your setting.

The “Enable character repeat” in the interface is the choice box of “Enable character

repeat”; “Repeat delay” is for setting repeat rate. The white zone at the bottom is a zone

to test the two settings by clicking the zone and pressing some key.

4.6 Mouse (optional)

Double click “Mouse” icon in “Control panel” and the following interface will appear.