User's Manual

SH226A User Manual

Switching On /Off

Press & hold the MFB for 3 seconds to turn SH226 on,blue LED flashes 5 times.

Press & hold the MFB for 3 seconds to turn SH226 off,red LED flashes 5 times.

Pairing

1. Press & hold the MFB for 5 seconds to get in to enter pairing mode. The LED indicator will flash in red

and blue alternatively.

2. Activate the Bluetooth feature on the mobile phone and set the media device to 'search for" or “add”

new Bluetooth devices.

3. Select " SH226" from the list of found devices to pair. If applicable. enter '0000' as passkey.

4. LED indicator will turn to solid blue when connection is completed.

5. If pairing fails, remove the excessive unused Bluetooth devices from a list of paired devices and re-start

the pairing process from step l.

SH226 recognizes the previous paired device and will re-connect when it' s powered on. To reset, press and

hold both Volume Up and Volume Down buttons simultaneously for 5 seconds to enter into the pairing

mode again.

Siri or Voice Command

In the standby mode, press & hold the MFB for 1.5 seconds to activate the voice command function on

Andriod or iOS devices. Refer to the phone manual for detailed instruction if applicable.

Managing Phone Calls

PAGE 1
SH226A User Manual Switching On /Off Press & hold the MFB for 3 seconds to turn SH226 on,blue LED flashes 5 times. Press & hold the MFB for 3 seconds to turn SH226 off,red LED flashes 5 times. Pairing 1. Press & hold the MFB for 5 seconds to get in to enter pairing mode. The LED indicator will flash in red and blue alternatively. 2. Activate the Bluetooth feature on the mobile phone and set the media device to 'search for" or “add” new Bluetooth devices. 3.
PAGE 2
Volume Up/Volume Down: Short press Volume Up Button,you will hear a remind beep while get Max volume/Short press Volume Down Button,you will hear a remind beep while get Min volume. Answer/End call: Briefly press MFB. Reject incoming call: Press and hold MFB for 1.5 seconds. Redial the last number: Double dick the MFB. Mute/Unmute: Press and hold the Volume Down button for 2 seconds. Transfer calls between SH226 and phone: Press and hold the Volume Up button for 3 seconds in the calling.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.