User's Manual

Bluetooth 4.2 Stereo headset
SH236
Operation Instructions
Turning On /Off
Press & hold the MFB for 4 seconds to turn SH236 on,the blue indicator will flash fast 5
times.
Press & hold the MFB for 3 seconds to turn SH236 on,the blue indicator will flash fast 5
times.
Pairing
1. When the headset is off , pres and hold down the MFB Button for 7 seconds to enter
pairing mode automatically. The LED indicator will flash in red and blue alternatively.
2. Activate the bluetooth feature on the mobile phone and set the media device to 'search
for" or “add” new bluetooth devices.
3. Select " SH236" from the list of found devices to pair. If applicable. enter '0000' as
passkey.
4. LED indicator will turn to solid blue when connection is completed.
5. If pairing fails, remove the excessive unused Bluetooth devices from a list of paired
devices and re-start the pairing process from step l.
Headset recognizes the previous paired device and will re-connect when it' s powered on.To
reset, after turn it on,press and hold both Volume up and Volume down buttons
simultaneously for 5 seconds to enter into the pairing mode.
Managing Phone Calls
Answer/End call: Briefly press MFB.
Reject incoming call: Press and hold MFB for 2 seconds.
Redial the last number: Double dick the MFB.
Mute/Unmute: Press and hold the Volume down button for 2 seconds.