User's Guide

Charging the Case
Using a USB-C to USB cable (included),
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case. When the case is
charging the Power & Battery Indicator LEDs
will ash white. When fully charged all LEDs
will turn solid white.
Truly Wire Free Earbuds
User’s Guide for Model IAEBT600 v2559-01
Power & Battery Indicator LEDs
The 4 white LEDs represent the amount of battery
the case charger has.
1 LED=25%
2 LEDs=50%
3 LEDs=75%
4 LEDs=100%
Function Button
Press and hold to power ON
Press to play/pause music.
Press to answer/end phone calls.
Press and hold for 2 seconds to reject incoming calls.
Press and hold for 5 seconds to power OFF.
Press and hold for 2 seconds to activate voice assistant (LEFT).
Quickly press twice to skip to next track (RIGHT).
Quickly press twice to play previous tracks(LEFT).
Press and hold for 2 seconds to switch modes between: Normal, Transparent, and ANC (RIGHT).
Charging Contacts
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts.
Be sure to match the left and right earbuds with the correct
docking station in the case.
2. When charging, the rst and fourth Power & Battery Indicator
LEDs on the case will ash white. When charging is complete,
the indicator LEDs will turn o.
3. Earbud Indicator LEDs will turn red when charging. When fully
charged, the LEDs will turn o.
Microphone
Earbud Indicator LED
Red when charging.
Lights o when fully charged.
IAEBT600-2559-01-IB - 04Aug2020.indd 1 8/4/2020 10:32:47 AM