User Instructions

ManualsBrandsShenZhen Tecbot Intelligent Robot ManualsDomestic AppliancesRobot Vacuum Cleaner

• Search “Tecbot ”on IOS App Store

or Google Play Store.

App Download and Network control

In order to make good use of the robot, we suggest that

you to use the APP to control the robot.

Before start, please confirm:

• Your smartphone or tablet connected to the Wi-Fi.

• IOS 8.0 or later

Android 4.4 or later

• Support 2.4G Wi-Fi

• Wi-Fi indicator blinks quickly.

• The robot is charging on the charging dock or

the battery is in a high level.

Tecbot

Android

If connection failed, check the following:

1.make sure the router is in networking.

2.make sure the Wi-Fi password correct.

3.only support 2.4G Wi-Fi

Add the robot in the APP and connect to Wi-Fi

1, Download the "Tecbot" APP from the IOS APP store or Android Google Play.

2. Go to the "Tecbot"APP and create your account.

3. Hit the "Robot" icon on the left-bottom corner to add the robot, scan the QR code on the side of the robot.

4. Wi-Fi settings:

a.Press and hold the button for 3-5 seconds, you will hear " beep", that means the robot is on the

connection mode, the button blinks quickly, follow the APP instructions.

b.If the above setting failed, select the compatible mode.

- After the setting completed, you can control the robot through the APP Tecbot.

- By using the APP Tecbot, you can select the cleaning mode, scheduling, setting the cleaning time frame,

monitoring the system, receiving the messages and more.

6. You can connect the Amazon Alexa or Google Asistant by following the APP instruction.

5. Follow the APP instructions to set the Wi-Fi.

11 12

You can just press the on the robot or remote control, it will return to the charging dock station.

Diagram：Add the robot in the APP and connect to Wi-Fi

1 2 3 4 5

Tecbot

Summary of content (6 pages)

PAGE 1
You can just press the on the robot or remote control, it will return to the charging dock station. Add the robot in the APP and connect to Wi-Fi 1, Download the "Tecbot" APP from the IOS APP store or Android Google Play. 2. Go to the "Tecbot"APP and create your account. 3. Hit the "Robot" icon on the left-bottom corner to add the robot, scan the QR code on the side of the robot. 4. Wi-Fi settings: a.
PAGE 2
Edge Cleaning Product Using / Start Cleaning The robot has multiple cleaning modes, you can change the mode through the robot, remote control, or APP. Auto cleaning Application scenario : Smart S shape cleaning route. Setting: on a standby mode, press the it will start Auto cleaning mode. button on the robot or button on the remote control, Application Scenario: The robot runs on the edge of walls into corners, after the edge cleaning completed, it will returns to the charging dock station.
PAGE 3
Product Using / Main brush & inlet Application scenario The main brush applied for the floors that has more debris, or carpet. Suction inlet is more suitable for the pet hair. 1 Step Disassembly method: push the main brush release button on both sides and take out the main brush cover. Lift up the main brush from the left side and take it out. Use the cloth to clean the dust inlet.
PAGE 4
Regular Maintenance Warm Prompt : Please turn off the power when you clean the robot and its accessories Dustbin 1 Remove the dustbin 2 Open the cap of the dustbin 3 Empty the dustbin Step Step Step 17 Tips: please clean the filters once a week, usually change a new filter 1-2 months The sponge filter and filter net can be washed, but the high efficiency filter is not washable Filter Clean the main brush & side brush 1 Remove the high efficiency filter, sponge filter and high efficiency filt
PAGE 5
Troubleshooting Serial Number Malfanction Robot will not charge Likely cause The charging dock may placed in a The robot could not returns to the charging dock wrong position. The robot is tangled with something on the floor(electrical cords, drooping curtains, carpet fringe etc.) Side brush is stuck or the rotation speed of the side brush decreases. The robot returns to the charging dock before it finishes the cleaning.
PAGE 6
App Download Products Parameters models Working Voltage 14 (V) Charging Time (H) Remote Control Model Battery Type Charging Dock TL Series 4 Rated Power (W) 25 Rated Input Voltage DC19 Rated Output Current DC1.0 (V) (A) Runtime On A Rated Output Voltage (V) Single Charge (min) 100 TEC1089 1.