User's Manual

11N Wireless Broadband Rout er User Guide
45
¾ W PS m ode : Provide t wo ways: PBC ( Push- But t on
Configurat ion) and PI N code.
¾ PBC: Select t he PBC and click Ok , or press and
hold the WPS button on the back panel of the
device for about one second. The WPS LED
indicator will be flashing for 2 m inutes, which
m eans the WPS is enabled. During this tim e
(flashing WPS LED), you can enable t he wireless
client t o im plem ent t he WPS/ PBC negotiation
between them . When t he WPS connect ion is
com plet ed, t he LED indicat or will be continuously lit.
To add m ore clients, repeat the above st eps.)
¾ PI N: I f t his opt ion is enabled, you need to enter a
wireless client’s PI N code in t he field and keep the
sam e code in the WPS client .
¾ Rese t OOB: Press this butt on, the WPS client will
be in an idle st ate, and t he WPS indicat or will turn
off. AP will not respond t o the WPS client ’s
connect ion request and will set the security m ode
as Open-None ( Disable) m ode.
N OTE: The use of WPS funct ion requires t he wireless
adapt er to support t his funct ion.
5 .2 .2 W PA- PSK
WPA guarant ees t o prot ect WLAN users’ dat a and only
the authorized net work user s can have access to WLAN.