User Manual

51
the WPS indicator will be off, which means the WPS
connection is completed. If more clients are added, repeat
the above steps. At present, the WPS supports up to 32
clients access.)
¾ PIN：If this option is enabled, you need to enter a wireless
client’s PIN code in the field and keep the same code in the
WPS client.
¾ WPS Summary ： Show the current state of Wi-Fi
protected setting, including authorized mode, encryption
type, default key and other information.
¾ WPS Current Status：Idle means WPS in idle state. Start
MSC process means the process has been started and waits
for being connected. Configured means the negotiation is
successful between server and clients.
¾ WPS Configured： “yes” means WPS feature is enabled
and goes into effect. “Not used” means it is not used.
Usually the AP-security has been enabled, here will
displayed “not used”.
¾ WPS SSID： Show the main SSID set by WPS.
¾ WPS Auth. Mode：The authorization mode deployed by
WPS, generally WPA/WPA2-personal mode.
¾ WPS Encrypt Type：The encryption type used by WPS,