User's Manual Part 1

II Quick Internet Setup

1 Getting Prepared

Before you start the installation process, you need to prepare the following:

Item

Description

Router

Find it in your package

Should have a installed IE8 or higher browser

Gather ISP

Information

DHCP, PPPoE or Static IP Internet Connection Type:

1. Ethernet Cable from the incoming Internet side: This is provided by your

ISP

2. ISP Information: Your Internet service provider (ISP) should have

provided you with all of the information needed to connect to the Internet.

If you cannot locate this information, ask your ISP to provide it

If your ISP uses a PPPoE Internet connection, you will need ISP login

name and password

 If you use a DHCP Internet connection, no information is needed

 If your ISP gives you a fixed or static IP address for Internet

connection, you will need to gather the following information:

1) IP Address

2) Subnet Mask

3) Gateway

4) DNS Server

5) Alternate DNS Server (Optional)

3G/4G Internet Connection:

1. 3G/4G Modem: For 3G/4G Internet connection, you need to buy a

3G/4G modem

2. 3G/4G ISP Information: Your Internet service provider (ISP) should

have provided you with all of the information needed to connect to the

Internet. If you cannot locate this information, ask your ISP to provide it

3. Ethernet Cable: This can be found in the product package. You will

need it to connect your PC to this device

WISP Internet Access:

1. Remote AP's SSID, MAC address, security mode, cipher type and

security key

2. Internet connection information provided by the remote AP

3. Ethernet Cable: This can be found in the product package. You will

need it to connect your PC to this device