User's Manual Part 1

II Quick Internet Setup

WISP Mode

In this mode, the RJ-45 port on this device functions as a WAN port. You can connect to this

device using an Ethernet cable.

3 Connect to Router

In the Wireless Router (DHCP, PPPoE, Static IP) mode, clients (such as computers, smart phones

and tablets) can only connect to this device wirelessly for sharing Internet access. In the WISP

mode or 3G Router mode, computers, smart phones and tablets can access and connect to this

device either wirelessly or using an Ethernet cable.

3.1 Connect to Device Wirelessly

Tip------------------------------------------------------------------------------------------------------------------------

1. The device's SSID is "Tenda_xxxxxx" by default (You can find it on the attached label).

2. If you secure your wireless network, you must use the security key to join it.

3. To join your wireless network, the PC you use must have an installed wireless network

adapter. If not, install one.