User's Manual

56
III Features & Configurations | Tenda
Knowledge Center
Default: The default policy for the client filter. For the packets that do not match
the set rule, the default rule is applied.
Filter Mode: Specify a filter mode for the rule.
 Deny: Disallow the packets that match the set rule to pass the router. For
other packets that do not match the set rule, the default policy is applied.
 Allow: Allow the packets that match the set rule to pass the router. For other
packets that do not match the set rule, the defau lt policy is applied.
Client Filter Application Example:
To prohibit PCs within the IP address range of 192.168. 0.110--192.168.0.111
from accessing Web pages during the time period of 8:00~18:00 from Monday to
Friday, follow the steps below:
① Click Add to add a filter rule.
② Filter Mode: Select Deny.
③ Description: Briefly describe the current rule. This field is optional.
④ IP: Enter 192.168.0.110 as the starting IP address and 192.168.0.111 as the
ending IP address.