User's Manual

62
III Features & Configurations | Tenda
① Click Browse.
② Select the firmware file you want to use and click Open.
③ Click Upgrade.
④ Click OK on the appearing screen and wait for it to complete.
When upgrade is completed, check the Current System Version field. It should
display the firmware you load.
5.3 Backup & Restore
Once you have configured the device the way you want it, you can save these
settings to a configuration file on y our local hard drive that can later be imported
to your device in case that the device is restored to factory default settings.
Click Tools -> Backup & Restore to enter the configuration screen.
Tip
It is advisable to include the file name suffix of ".cf g" to avoid problems when
renaming the file name.
To backup configurations:
① Click Backup.