User's Manual

II Quick Setup | Tenda

II Quick Setup

1 Hardware Install

You can either connect to the device wirelessly or using Ethernet cables. Select

an install method according to your network environment.

A. If you access the Internet via a 3G/4G USB modem, see 3G/4G Router

Mode.

B. If you access the Internet by connecting the device to the Ethernet cable

from the incoming Internet side, see Wireless Router Mode.

C. If you acquire Internet access from a remote AP on an existing network, see

Universal Repeater Mode.

Note

① DO NOT expose the device to heat sources.

② Disconnect the device from power supply in thunderstorm weather.

③ Keep the device away from electrical appliances (such as electromagnetic

cooker and cordless phone, etc .) to avoid electromagnetic interference .

3G/4G Router Mode

By connecting an activated 3G/4G USB modem to your device and it gives you

the freedom to roam while staying connected to the Internet.

① Insert a 3G/4G USB modem to the device.

② Connect the device to a power outlet.

③ Connect your desktop, notebook and smart phone, etc. to the device.