User's Manual

III Features & Configurations | Tenda

Tip

① The device operates in Auto (Auto-negotiation) mode by default. Usually, it

works for most cases.

② In some situations, you might need to change the speed/duplex mode. For

example, if the cable connected to your device's WAN port is longer than

100m, you may need to use 10M full-duplex or 10M half-duplex for better

performance. Ensure that your device's WAN port operates with the same

speed and duplex mode as the remote link partner. Otherwise, your device's

WAN port may not receive and send data.

2.4 DNS Settings

Click Basic -> DNS Settings to enter the configuration interface.