User's Manual

III Features &Connectivity

Configuration Procedures:

① Filter Mode: Select Permit Only.

② Access Policy: Select a rule ID, for example, (1).

③ Policy Name: Briefly describe the current rule, say, yahoo, (It can only consist of numbers,

letters, or underscore). This field is optional.

④ MAC Address: Specify the MAC address of the computer that you want to restrict,

00:E4:A5:44:35:69.

⑤ Time: Keep the default of 0:00 ~ 0:00. The rule will be applied 24hrs/day.

⑥ Day(s): Select Mon ~ Fri.

⑦ Enable: Check to activate this rule.

⑧ Click OK to save your settings.

⑨ Repeat steps 1-7 to configure a rule for the MAC address "00:E4:A5:44:35:6A".

5.3 Client Filter

This section allows you to set the times specific clients can or cannot access services on the

Internet via the devices' IP addresses and port numbers.

Click Security -> Client Filter Settings to enter the configuration interface. Select a Policy from

the drop-down menu and briefly describe it in the corresponding field. You can set the access

restriction or permission in detail including the time period, and specific days of the week. Three

options are available: Disable, Forbid Only and Permit Only.

A. Disable: Disable the Filter feature.