User's Manual

II Quick Internet Setup

B. If connection status displays "Disconnected” (as shown below), the Ethernet cable from the

incoming Internet side to the router's WAN port may be connected improperly or disconnected.

Make sure the cable from the incoming Internet side is properly connected to the router's WAN

port. If nothing is wrong, "Connecting" or "Connected" will be displayed.

C. If connection status displays "Connecting”, wait until the webpage automatically refreshes 5

times.

And if it still displays "Connecting", try the following steps:

 If you are using DHCP Internet connection type, try cloning MAC address. For more