User's Manual

III Features &Connectivity

1.3 MAC Clone

Some ISPs (Internet Service Providers) require end-user's MAC address to access their network.

This feature copies your current PC's MAC address to the router. Click Advanced -> MAC Clone

to enter the configuration screen.

Knowledge Center-----------------------------------------------------------------------------------------------

1. Restore Default MAC: Reset the router’s WAN MAC to factory default.

2. Clone MAC Address: Clicking this button copies the MAC address of the computer that you

are now using to the router. Also, you can manually enter the MAC address that you want to use.

You have to use the computer whose MAC address is allowed by your ISP.

---------------------------------------------------------------------------------------------------------------------------------

To restore default MAC address:

① Click Restore Default MAC.

② Click OK to save your settings.

To clone the MAC address of the computer that you are currently using to the router:

① Click Clone MAC Address.

② Click OK to save your settings.

To manually enter the MAC address allowed by your ISP:

① Enter the MAC address allowed by your ISP.

② Click OK to save your settings.

1.4 WAN Speed