User's Manual

III Features &Connectivity

Configuration Procedures:

① DHCP Server: Select whether to enable or disable the DHCP server feature.

② IP Pool Start IP Address / IP Pool End IP Address: You can specify the starting and ending

address of the IP address pool here. These addresses should be part of the same IP address

subnet as the router’s LAN IP address.

③ Lease Time: The lease time is a time length that the IP address is assigned to each device

before it is refreshed.

④ Click OK to save your settings.

Tip-----------------------------------------------------------------------------------------------------------------------

1. By default, the router functions as a DHCP server. Do not disable the DHCP server feature

unless you want to manually configure the TCP/IP settings for all PCs on your LAN.

2. Lease time will be renewed automatically upon expiry. No additional configurations are

needed.

3. If you are not an advanced user, the default DHCP server settings are recommended.

---------------------------------------------------------------------------------------------------------------------------------

1.8 DHCP Client List

Click Advanced -> DHCP Client List. You can know whether there are unauthorized accesses by

viewing the client list.

Also, you can specify a reserved IP address for a PC in the LAN. That PC will always receive the

same IP address each time when it accesses the DHCP server. Reserved IP addresses could be

assigned to servers that require permanent IP settings.