Wireless Modem Router User Guide -1-
Wireless Modem Router User Guide Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd.
Wireless Modem Router User Guide Table of Contents COPYRIGHT STATEMENT........................................................................................................................................ - 2 ABOUT THIS MANUAL .............................................................................................................................................. - 5 CHAPTER1 GET TO KNOW YOUR WIRELESS ROUTER .................................................................................
Wireless Modem Router User Guide 4.5 MANAGEMENT ...................................................................................................................................................... - 89 4.5.1 Settings .......................................................................................................................................................... - 89 4.5.2 System Logs .................................................................................................................
Wireless Modem Router User Guide About This Manual This user manual describes how to install, configure, operate, and troubleshoot the modem router in a simple and easy-to-understand way.
Wireless Modem Router User Guide Chapter 1 Get to Know Your Wireless Router This user guide applies to the following four models: D302 and D152. The D302 is used as an example throughout this user guide.
Wireless Modem Router User Guide ¾ Interchangeable LAN/WAN ports to schedule the Ethernet port to function either as a LAN or a WAN port ¾ Interchangeable LAN/IPTV to schedule the Ethernet port to function either as a LAN or an IPTV port ¾ Optional Ethernet and ADSL Uplinks: Access Internet via ADSL2+ Broadband Internet Service or an interchangeable LAN/WAN RJ-45 port ¾ Multiple Internet Connection Types: Bridging, PPPoE, IPoE, PPPoA, IPoA, dynamic IP and static IP ¾ ¾ IPTV Service lets your surf
Wireless Modem Router User Guide Chapter 2 Hardware Install If you have not already set up your new router using the Quick Install Guide that comes in the box, this chapter walks you through the hardware install. To set up your Internet connection, see Chapter 2 Quick Internet Setup. Front Panel The LEDs on the device are described below: LED Status Description Solid Power is supplied to the device. Off Power is not supplied to the device. Blinking System is functioning correctly.
Wireless Modem Router User Guide Solid WPS Blinking Off Client connected successfully. The WPS LED starts blinking if you pressed the WPS button on the device or interface. If there is no wireless clients connected, the WPS LED turns off after blinking for 2 minutes. Back Panel ¾ ON/OFF: Power switch to turn the router on or off. _________________________________________________________________________________________________ Note: Please use the included power adapter.
Wireless Modem Router User Guide Chapter 3 Quick Internet Setup This chapter instructs you to quickly set up your Internet connection. The Quick Internet Setup applies only to ADSL Uplink mode. If you are not directly connecting to the ADSL line via a phone cable, please click the Advanced button on the home page and then select Advanced Setup -> Layer2 Interface -> ETH Interface. For more information, see To set up the ETH interface and To setup WAN Service for ETH Interface. 3.
Wireless Modem Router User Guide Using Browser 1. Set your PC to Obtain an IP address automatically. For more information, see Appendix 1 Configure Your PC. 2. Launch a web browser and enter 192.168.1.1 to display the login window. 3. Enter admin in both the login User Name and Password boxes if you first time access the router and then click the Login button to enter the screen below.
Wireless Modem Router User Guide 3.2 Internet Setup a. Select your country. b. Select your ISP. c. VPI and VCI fields will be populated automatically if you select a correct country and ISP. d. Select your Internet connection type. Depending on the type of connection, you are prompted to enter your ISP settings, as shown in the following table: Internet Connection Type ISP Information Enter the ISP login user name and password.
Wireless Modem Router User Guide _________________________________________________________________________________________________ Note: If your country and/or your ISP are not covered on the home page, please click the button on the home page and then select Advanced Setup -> Layer2 Interface -> ATM Interface and then click Add there to manually configure the VPI and VCI. If you cannot locate this information, refer to Appendix 4 VPI/VCI List or ask your ISP to provide it.
Wireless Modem Router User Guide Chapter 4 Advanced Settings This chapter describes the advanced features of your router. The information is for users with a solid understanding of networking concepts who want to configure the router for unique situations. This chapter includes the following sections: • Device Info • Advanced Setup • Wireless • Diagnostics • Management Click Advanced on the home page to enter the screen below.
Wireless Modem Router User Guide 4.1 Device Info This section includes the following information: • Summary • WAN • Statistics • Route • ARP • DHCP Summary Here you can view system information and current status of your WAN connection as seen in the screenshot.
Wireless Modem Router User Guide WAN Here you can view the WAN Information including Interface, Description, Type, IGMP, NAT, Firewall, Status, IPv4 Address and VLAN ID as seen in the screenshot. Statistics Here you can view the packets received and transmitted on LAN/WAN ports. Statistics--LAN: Displays the packets received and transmitted on the LAN ports as seen in the screenshot below.
Wireless Modem Router User Guide Route Here you can view the route table as seen in the screenshot: ARP Here you can view the IP and MAC addresses of the PCs that attach to the device either via a wired or wireless connection as seen in the screenshot: - 17 -
Wireless Modem Router User Guide DHCP Here you can view the DHCP leases, including IP and MAC addresses of the PCs, hostnames and remaining lease time as seen in the screenshot: 4.
Wireless Modem Router User Guide • NAT • Security • Parental Control • Quality of Service • Routing • DNS • DSL • UPnP • Print Server • Storage Service • Interface Grouping • IP Tunnel • Certificate • Multicast • IPTV 4.2.1 Layer2 Interface Click Advanced Setup -> Layer2 Interface to enter the Layer2 Interface screen. This router provides two Layer2 Interfaces: - ATM Interface for ADSL broadband Internet service - ETH Interface for connecting to Internet via an Ethernet cable.
Wireless Modem Router User Guide Enter the VPI and VCI values, Select a DSL Link Type (Internet connection type): EoA (EoA is for PPPoE, IPoE, and Bridge.), PPPoA or IPoA, leave other options unchanged from factory defaults and click Apply/Save and then refer to To setup WAN Service for ATM Interface to configure the WAN service for Internet access.
Wireless Modem Router User Guide The Ethernet port configured here is to function as a WAN port. Only one LAN port can be configured as the WAN port at a time. After you finish your settings, click the Apply/Save button and then refer to To setup WAN Service for ETH Interface to configure the WAN service for Internet access.
Wireless Modem Router User Guide IPoE (If your ISP uses DHCP to assign Dynamic IP No entries are needed. Static (Fixed) IP Enter the assigned IP address, subnet mask, and the IP address of your ISP’s primary DNS server. This your IP address or if your ISP assigns information should have been provided to you by you a static (fixed) IP address, IP your ISP. If a secondary DNS server address is subnet mask and the gateway IP available, enter it also.
Wireless Modem Router User Guide 1. 2. 3. 4. Select PPPoE. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack). Click Next. _________________________________________________________________________________________________ Note: If you select IPv6 or IPv4 & IPv6 (dual stack), skip to IPv6.
Wireless Modem Router User Guide ¾ Multicast Proxy: If enabled, the router will use multicast proxy. IPv6 If you select IPv4 as the network protocol, skip this section. 1. Check Launch Dhcp6c for Prefix Delegation (IAPD). 2. If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Or configure a static IP address. 3. Click Next -> Next -> Apply/Save. WAN Gateway Here you can configure the WAN gateway address. After you configure it click Next.
Wireless Modem Router User Guide _________________________________________________________________________________________________ Note: Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again.
Wireless Modem Router User Guide Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the PPPoE connection is successful, you can access Internet. IP over Ethernet (IPoE) If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE).
Wireless Modem Router User Guide 1. 2. 3. 4. Select IPoE. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack). Click Next. _________________________________________________________________________________________________ Note: If you select IPv6 or IPv4 & IPv6 (dual stack), skip to IPv6.
Wireless Modem Router User Guide ¾ Obtain an IP address automatically: This allows the router to automatically acquire IP information from your ISP or your existing networking equipment. ¾ Use the following Static IP address: This allows you to specify the Static IP information provided by your ISP or that corresponds with your existing networking equipment. ¾ WAN IP Address: The Internet IP address provided by your ISP for accessing Internet.
Wireless Modem Router User Guide To configure a static IPv6 address 1. Select Use the following Static IPv6 address. 2. Configure WAN IPv6 Address/Prefix Length and WAN Next-Hop IPv6 Address. 3. Click Next -> Next to enter the screen below.
Wireless Modem Router User Guide 4. Select Use the following Static IPv6 DNS address and manually enter the DNS server address. If you have two DNS server addresses, enter the second also. 5. Click Next -> Apply/Save. _________________________________________________________________________________________________ Note: If "Obtain an IP address automatically" is chosen, DHCP will be enabled for PVC in IPoE mode.
Wireless Modem Router User Guide Here you can configure the NAT settings. If you are unsure about the options, please keep the default settings and then click Next. Here you can configure the WAN gateway address. Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected.
Wireless Modem Router User Guide Note: 1.DNS Server Interfaces can have multiple WAN interfaces served as system dns servers but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. 3.
Wireless Modem Router User Guide When the IPoE connection is successful, you can access Internet. Bridging If you wish to iniate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead of sharing it with others), you can use the Bridging DSL link type and create a dialup program on your PC.
Wireless Modem Router User Guide The Enter Service Description field is optional. We recommend that you keep it unchanged from default and click Next. Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the bridging connection is successful, you can access Internet.
Wireless Modem Router User Guide PPPoA If you have selected the PPPoA from the ATM Interface screen in Layer2 Interface, you will see the screen below when you click the WAN Service tab, select the configured interface and click Next. 1. 2. 3. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack). Click Next.
Wireless Modem Router User Guide ¾ PPP User Name: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. ¾ PPP Password: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. ¾ Authentication Method: This is used by ISP to authenticate the client that attempts to connect. If you are not sure, consult your ISP or select Auto. ¾ Dial on demand: Connect to ISP only when there is traffic transmission.
Wireless Modem Router User Guide WAN DNS Here you can configure the WAN DNS address: -Click the Select DNS Server Interface from available WAN interfaces option -OR select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system And then click Next. _________________________________________________________________________________________________ Note: 1.
Wireless Modem Router User Guide Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the PPPoA connection is successful, you can access Internet. IPoA If you have selected the IPoA from the ATM Interface screen in Layer2 Interface, you will see the screen above when you click the WAN Service tab, select the configured interface and click Next.
Wireless Modem Router User Guide 2. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Click Next. ¾ WAN IP Address: The Internet IP address provided by your ISP for accessing Internet. ¾ WAN Subnet Mask: The subnet mask address provided by your ISP for accessing Internet. 1. Enter the WAN IP address and subnet mask assigned by your ISP. This information should have been provided to you by your ISP.
Wireless Modem Router User Guide Here you can configure the WAN gateway address. After you configure it click Next. The default setting is recommended. ______________________________________________________________________________________________ Note: Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected.
Wireless Modem Router User Guide _________________________________________________________________________________________________ Note: 1. DNS Server Interfaces can have multiple WAN interfaces served as system dns servers but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 2.
Wireless Modem Router User Guide mode. _________________________________________________________________________________________________ Tip: eth0, eth1, eth3 and eth3 respectively represent the LAN port1, LAN port2, LAN port3 and LAN port4 of the device. _________________________________________________________________________________________________ PPP over Ethernet (PPPoE) Click Advanced Setup -> WAN Service -> Add, select the configured interface and then click Next to enter the following screen.
Wireless Modem Router User Guide PPP User Name: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. PPP Password: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. PPPoE Service Name: This information is provided by your ISP. Only enter it if instructed by your ISP. Authentication Method: This is used by ISP to authenticate the client that attempts to connect.
Wireless Modem Router User Guide 1. Check Launch Dhcp6c for Prefix Delegation (IAPD). 2. If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Or configure a static IP address. 3. Click Next -> Next -> Apply/Save.
Wireless Modem Router User Guide WAN Gateway Here you can configure the WAN gateway address. After you configure it click Next. The default setting is recommended. WAN DNS Here you can configure the WAN DNS address. After you configure it click Next. The default setting is recommended if you cannot locate this information.
Wireless Modem Router User Guide Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the PPPoE connection is successful, you can access Internet. IP over Ethernet (IPoE) If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE).
Wireless Modem Router User Guide 1. 2. 3. 4. Select IPoE. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack). Click Next. _________________________________________________________________________________________________ Note: If you select IPv6 or IPv4 & IPv6 (dual stack), skip to IPv6.
Wireless Modem Router User Guide Use the following Static IP address: This allows you to specify the Static IP information provided by your ISP or that corresponds with your existing networking equipment. WAN IP Address: The Internet IP address provided by your ISP for accessing Internet. WAN Subnet Mask: The subnet mask address provided by your ISP for accessing Internet. WAN gateway IP Address: The gateway IP address provided by your ISP for accessing Internet.
Wireless Modem Router User Guide To configure a static IPv6 address 1. Select Use the following Static IPv6 address. 2. Configure WAN IPv6 Address/Prefix Length and WAN Next-Hop IPv6 Address.
Wireless Modem Router User Guide 3. Click Next -> Next to enter the screen below. 4. Select Use the following Static IPv6 DNS address and manually enter the DNS server address. If you have two DNS server addresses, enter the second also. 5. Click Next -> Apply/Save.
Wireless Modem Router User Guide Here you can configure the NAT. If you are not an advanced user we recommend you to keep the default settings and then click Next. WAN Gateway Here you can configure the WAN gateway address. After you configure it click Next. The default setting is recommended. WAN DNS Here you can configure the WAN DNS address. After you configure it click Next. The default setting is recommended if you cannot locate this information.
Wireless Modem Router User Guide Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the IPoE connection is successful, you can access Internet. Bridging If you wish to iniate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead of sharing it with others), you can select the Bridging and create a dialup program on your PC.
Wireless Modem Router User Guide Edit the Service Description, which is optional. And then click Next. Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the connection is successful, you can access Internet.
Wireless Modem Router User Guide 4.2.3 LAN Setup Here you can configure the LAN IP Address and Subnet Mask. This IP address is to be used to access the device’s settings through a web browser. Be sure to make a note of any changes you apply to this page. IPv4 IP Address: The device's LAN IP address. The default setting is 192.168.1.1. Subnet Mask: The LAN subnet mask of the device.
Wireless Modem Router User Guide Apply/Save: After you configure all the needed settings, click this button to apply and save them. _________________________________________________________________________________________________ Tip: DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network.
Wireless Modem Router User Guide addresses to IPv6 clients. Leased Time (hour): The lease time is a time length that the IP address is assigned to each device before it is refreshed. Start interface ID/End interface ID: Specify the start/end interface ID Interface ID does NOT support ZERO COMPRESSION "::". Please enter the complete information. For exampe: Please enter "0:0:0:2" instead of "::2".
Wireless Modem Router User Guide To enter the virtual server screen, click NAT -> Virtual Server and then click the Add button to add rules. Use Interface: Select a WAN connection to which you wish to apply the rules. When there is only one WAN connection available, the rules will be automatically applied to it. Service Name: - Select a Service option: Allows you to select an existing service from the drop-down list. - Custom Service: Allows you to customize a service.
Wireless Modem Router User Guide And want your friends on Internet to access the FTP server and web server on default ports. To access your FTP or web server from the Internet, a remote user has to know the Internet IP address or Internet name of your router, such as www.tendacn.com. In this example, we assume the Internet IP address of your router is 183.37.227.201. Then follow instructions below: To configure the router to make your local FTP server public: 1.
Wireless Modem Router User Guide 6. Now you can view your configurations as seen in the screenshot below. Your friends on Internet will then be able to access the web server simply by entering "http://183.37.227.201" in his browser. _________________________________________________________________________________________________ Note: The "Internal Port End" cannot be modified directly. Normally, it is set to the same value as "External Port End".
Wireless Modem Router User Guide To enter the Port Triggering screen, click NAT -> Port Triggering and then click the Add button to add rules. You can configure the port settings from this screen by selecting an existing application or creating your own (Custom application) and click "Save/Apply" to add it. Use Interface: Select a WAN connection to which you wish to apply the rules. When there is only one WAN connection available, the rules will be automatically applied to it.
Wireless Modem Router User Guide DMZ Host IP Address: The IP Address of the device for which the router’s firewall will be disabled. Be sure to assign a static IP Address to that device. The DMZ host should be connected to a LAN port of the device. Be sure to assign a static IP address to that DMZ host. _________________________________________________________________________________________________ Warning! DMZ servers pose a security risk.
Wireless Modem Router User Guide Choose Add to enter the following screen: This screen allows you to create a filter rule to identify outgoing IP traffic by specifying a new filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Click 'Apply/Save' to save and activate the filter. Filter Name: Enter a descriptive filtering name. IP Version: Select either IPv4 or IPv6.
Wireless Modem Router User Guide Click Add to enter the following screen: This screen allows you to create a filter rule to identify incoming IP traffic by specifying a new filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Click Apply/Save to save and activate the filter. IP Version: Select either IPv4 or IPv6. Protocol: TCP/UDP, TCP, UDP and ICMP are available for your option.
Wireless Modem Router User Guide _________________________________________________________________________________________________ Warning! Changing from one policy to another of an interface will cause all defined rules for that interface to be REMOVED AUTOMATICALLY! You will need to create new rules for the new policy.
Wireless Modem Router User Guide Here you can add time of day restriction that an attached LAN device can access Internet. The 'Browser's MAC Address' automatically displays the MAC address of the LAN device where the browser is running. To restrict other LAN device, click the "Other MAC Address" button and enter the MAC address of the other LAN device. User Name: Enter a user name. Browser's MAC Address: Automatically adds the MAC address of the attached LAN device where the browser is running.
Wireless Modem Router User Guide Select the URL List Type (Exclude or Include) first and then click Add to enter the screen below for configuring the list entries. Maximum 100 entries can be configured. URL Address: Enter the URLs that a specific LAN PC cannot access. Port Number: Specify the port number used by the web server. The default is 80, which is the standard protocol for web servers. Enter the URL address and port number then click "Apply/Save" to add the entry to the URL filter.
Wireless Modem Router User Guide • QoS Classification If Enable QoS checkbox is selected, choose a default DSCP mark to automatically mark incoming traffic without reference to a particular classifier. Click Apply/Save button to save it. Enable QoS: Check/uncheck to enable/disable the QoS feature. _________________________________________________________________________________________________ Note: 1. If Enable Qos checkbox is not selected, all QoS will be disabled for all interfaces. 2.
Wireless Modem Router User Guide To add a queue, click the Add button to enter the following screen. Here you can configure a QoS queue and add it to a selected layer2 interface. QoS Classification To add a rule, click the Add button. To remove rules, check their remove-checkboxes, then click the Remove button. The Enable button will scan through every rules in the table. Rules with enable-checkbox checked will be enabled. Rules with enable-checkbox un-checked will be disabled.
Wireless Modem Router User Guide To add a rule, click the Add button to enter the following screen. Here you can create a traffic class rule to classify the ingress traffic into a priority queue and optionally mark the DSCP or Ethernet priority of the packet. Click Apply/Save to save and activate the rule. 4.2.
Wireless Modem Router User Guide Selected Default Gateway Interfaces: Displays the selected dfault gteway iterfaces. Select a WAN interface and click the Available Routed WAN Interfaces: Displays the available routed WAN interfaces. Select a WAN interface and click the button to move it to the Available Routed WAN Interfaces box. button to add it to the Selected Default Gateway Interfaces box. Apply/Save: Click to save and activate your settings.
Wireless Modem Router User Guide IP Version: Select either IPv4 or IPv6. Destination IP address/prefix length: Enter the destination IP address and prefix length of the final destination. Interface: Select an interface from the drop-down list. Gateway IP address: Enter the gateway IP address, which must be a router on the same LAN segment as the router. Metric: Enter a number in the Metric field. This stands for the number of routers between your network and the destination.
Wireless Modem Router User Guide -Select Use the following Static IPv6 DNS address and enter the static IPv6 DNS server Addresses. And then click Apply/Save. _________________________________________________________________________________________________ Note: 1.DNS Server Interfaces can have multiple WAN interfaces served as system dns servers but only one will be used according to the priority with the first being the higest and the last one the lowest priority if the WAN interface is connected.
Wireless Modem Router User Guide Click the Add button to configure the DDNS settings. D-DNS Provider: Select your DDNS service provider from the drop-down menu. Hostname: Enter the DDNS domain name registered with your DDNS service provider. Interface: Specify a WAN connection interface. User Name: Enter the DDNS user name registered with your DDNS service provider. Password: Enter the DDNS Password registered with your DDNS service provider. Click Apply/Save to save your settings. 4.2.
Wireless Modem Router User Guide from the negotiation between your router and ISP. Wrong configurations may fail your Internet access. The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP or our technical staff when your router fails to negotiate with ISP in DSL (ATM) mode. Usually, this failure can be identified and confirmed if the ADSL LED on the device keeps displaying a slow or quick blinking light.
Wireless Modem Router User Guide Here you can select the test mode and tone. _________________________________________________________________________________________________ Tip: If you are unsure about the ADSL parameters, please apply the factory default settings.Wrong configurations may fail your Internet access. _________________________________________________________________________________________________ 4.2.
Wireless Modem Router User Guide Click Add to enter the screen below: Group Name: The name of a configured rule. WAN Interface used in the grouping: WAN connection to which the interface grouping rules apply. Available LAN Interfaces: LAN interfaces that can be used for interface grouping. Grouped LAN Interfaces: LAN interfaces that use specified WAN interface. To create a new interface group: 1. Enter the Group name and the group name must be unique and select either 2. (dynamic) or 3.
Wireless Modem Router User Guide 4.1.13 IP Tunnel This section explains the following information: • IPv6inIPv4 • IPv4inIPv6 IPv6inIPv4 Click IPv6inIPv4 and Add to enter the following screen: ¾ ¾ Tunnel Name: Specify the name of the tunnel. Mechanism: Currently, only DS-Lite configuration is supported..
Wireless Modem Router User Guide ¾ ¾ ¾ ¾ ¾ Associated WAN Interface: Specify the WAN iterface of the tunnel. Associated LAN Interface: Specify the LAN iterface of the tunnel. Manual: If you select Manual, configure the following settings also: IPv4 Mask Length: Specify the IPv4 Mask Length. 6rd Prefix with Prefix Length: Specify the 6rd Prefix with Prefix Length. Border Relay IPv4 Address: Specify the Border Relay IPv4 Address. Automatic: If Automatic is selected, no configurations are required.
Wireless Modem Router User Guide certificates can be stored. To generate generate a certificate signing request: 1. Click the Create Certificate Request button to enter the page below. 2. Specify the Common Name, Organization Name and State/Province Name 3. Enter the 2-letter Country Code for the certificate. 4. Click Apply to apply your settings. To Import certificate˖ 1. Click the Import Certificate button on the local certificates page to enter the page below.
Wireless Modem Router User Guide 2. Enter the certificate name. 3. Paste the certificate content and private key. 4. Click Apply to apply your settings. Trusted CA (Certificate Authority) Certificates Here you can Add, View or Remove CA certificates. CA certificates are used by you to verify peers' certificates. Maximum 4 certificates can be stored.
Wireless Modem Router User Guide To Import certificate˖ 1. Click the Import Certificate button to enter the page below. 2. Enter the certificate name. 3. Paste the certificate content. 4. Click Apply to apply your settings. 4.1.15 Multicast Here you can configure the multicast feature. To configure IGMP for IPv4 1. Check the LAN to LAN (Intra LAN) Multicast Enable box. 2. Check the Mebership Join Immediate (IPTV) box. This is only required for IPTV. 3.
Wireless Modem Router User Guide To configure IGMP for IPv6 1. Check the LAN to LAN (Intra LAN) Multicast Enable box. 2. Keep other options unchanged from factory defaults if you are not an advanced user. This is strongly recommended.
Wireless Modem Router User Guide 4.1.16 IPTV If you check the Enable IPTV checkbox, you must choose a layer2 interface, and then configure the PVC/VLAN info (ATM), or ETH port/VLAN info (ETH). Click Apply/Save button to save it. Enable IPTV: Check/uncheck to enable/disable the IPTV service.
Wireless Modem Router User Guide _________________________________________________________________________________________________ Tip: For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID. _________________________________________________________________________________________________ 4.3 Wireless This section explains the following information: • Basic • Security • MAC Filter • Wireless Bridge • Station Info 4.3.
Wireless Modem Router User Guide 4.3.2 Security This page allows you to configure security features of the wireless LAN interface. You may setup configuration manually OR through WiFi Protcted Setup (WPS). WPS Setup Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring complicated settings.
Wireless Modem Router User Guide Network Authentication: Select Open, Shared, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the drop-down list to encrypt your wireless network. Depending on the type of network authentication you select, you will be prompted to enter corresponding settings. WEP Encryption: Select Enabled or Disabled. Encryption Strength: Select 128-bit or 64-bit. Current Network Key: Select a network key to be active.
Wireless Modem Router User Guide 4. Click Apply/Save. _________________________________________________________________________________________________ Note: If “allow” is choosed and mac filter is empty, WPS will be disabled. _________________________________________________________________________________________________ 4.3.4 Wireless Bridge This page allows you to configure wireless bridge (also known as Wireless Distribution System) features of the wireless LAN interface.
Wireless Modem Router User Guide Restrict which disables wireless bridge restriction. Any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in Remote Bridges will be granted access. The Enabled (Scan) enables wireless bridge restriction and automatically scans the remote bridges. Remote Bridges MAC Address: Specify the MAC address of the remote bridge.
Wireless Modem Router User Guide 4.5 Management This section explains the following information: • Settings • System Logs • Security Log • SNMP Agent • TR-069 Client • Internet Time • Access Control • Update Software • Reboot 4.5.1 Settings This section explains the following information: • Backup • Update • Restore Default Backup Here you can save a copy of your device’s configurations to your computer.
Wireless Modem Router User Guide Update Here you can restore the configuration from a file saved on your PC. Restore Default Under some circumstances (for example, join a different network or unfortunately forgetting the login password), you may need to remove the existing configuration and restore the factory default settings.
Wireless Modem Router User Guide 4.5.2 System Logs The System Log dialog allows you to view the System Log and configure the System Log options. To view the System Log, simply click View System Log. To configure the System Log options, click Configure System Log.
Wireless Modem Router User Guide Log: If Enable is selected, the system will begin to log all the selected events. Log Level: All events above or equal to the selected level will be logged. Display Level: All logged events above or equal to the selected level will be displayed. Mode: If the selected mode is 'Remote' or 'Both,' events will be sent to the specified IP address and UDP port of the remote syslog server. If the selected mode is 'Local' or 'Both,' events will be recorded in the local memory.
Wireless Modem Router User Guide SNMP Agent˖Select “Enable” to activate the SNMP Agent feature or “Disable” to deactivate it. Read Community: Specify a Read Community string. The default is public. Set Community: Specify a Set Community string. The default is private. System Name: Specify a descriptive system name. System Location: Specify a system location. System Contact: Specify a system contact. Trap Manager IP: Specify the IP address of the Trap Manager. 4.5.
Wireless Modem Router User Guide 4.5.6 Internet Time This page is used to set the router’s system time. If Automatically synchronize with Internet time servers is checked, the system will automatically connect to NTP server to synchronize the time. First/Second/Third/Fourth/Fifth NTP time server: Select a NTP time server from the drop-down list. If the NTP time server you are looking for is not included in the list, select “Other” and then enter it manually in the box.
Wireless Modem Router User Guide User Name: Enter the user name of up to 16 characters. Old Password: Enter the old password of up to 16 characters. New Password: Enter a new password of up to 16 characters. Confirm Password: Re-enter to confirm the new password. Apply/Save: Click to change or create passwords. _________________________________________________________________________________________________ Note: Password cannot contain a space.
Wireless Modem Router User Guide _________________________________________________________________________________________________ Note: 1. If you are not an advanced user, we suggest you keep the default settings. 2. To access the device from the LAN side, you must use the LAN IP address and log in as "admin" or "user"; to access the device from the WAN side, you must use the WAN IP address and log in as "support".
Wireless Modem Router User Guide 4.5.9 Reboot Click the Reboot button to reboot the router.
Wireless Modem Router User Guide Appendix 1 Configure Your PC Screens to configure TCP/IP properties in other Operating Systems are similar to those below. Windows 7 Click Start-> Control Panel-> Network and Sharing Center-> Change adapter settings, select a desired Local Area Connection and select Properties.
Wireless Modem Router User Guide MAC Click on the Apple icon from the top-left corner and select System Preferences.
Wireless Modem Router User Guide - 100 -
Wireless Modem Router User Guide - 101 -
Wireless Modem Router User Guide Appendix 2 Join Your Wireless Network Windows XP a). Click Start-> Settings -> Control Panel; b). Double click Network Connections, select the desired wireless network connection and then click View Available Wireless Networks.
Wireless Modem Router User Guide When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. Windows 7 Click Start-> Control Panel-> Network and Sharing Center-> Change adapter settings, select a desired wireless connection and click Connect/Disconnect.
Wireless Modem Router User Guide - 104 -
Wireless Modem Router User Guide When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. MAC Click ->System Preferences.
Wireless Modem Router User Guide - 106 -
Wireless Modem Router User Guide iPhone/iPad - 107 -
Wireless Modem Router User Guide - 108 -
Wireless Modem Router User Guide - 109 -
Wireless Modem Router User Guide Appendix 3 FAQs 1. What information should I have to access Internet via the ADSL uplink? If you have DSL broadband service, you might need the following information to set up your modem router.
Wireless Modem Router User Guide 6. Where should I place the wireless device for optimum performance? 1. Place it in the center to extend wireless coverage as far as possible. 2. Never place the device near to metal objects or in direct sunshine. 3. Keep it far away from devices that use the 2.4 GHz radio wave frequency to transmit and receive data, such as 802.
Wireless Modem Router User Guide Appendix 4 VPI/VCI List The following table lists common ISPs and their VPI and VCI numbers. If you cannot locate your ISP and their VPI and VCI information here, ask your ISP to provide it.
Wireless Modem Router User Guide Iceland Islandssimi 0 35 PPPoA VC-MUX Iceland Siminn 8 48 PPPoA VC-MUX Israel 8 35 PPPoA VC-MUX Italy 8 35 PPPoA VC-MUX Iran (1) 0 35 PPPoE LLC Iran (2) 8 81 PPPoE LLC Israel(1) 8 48 PPPoA VC-MUX Jamaica (1) 8 35 PPPoA VC-MUX Jamaica (2) 0 35 PPPoA VC-MUX Jamaica (3) 8 35 1483 Bridged IP LLC SNAP Jamaica (4) 0 35 1483 Bridged IP LLC SNAP Kazakhstan 0 33 PPPoA VC-MUX Malaysia 0 35 PPPoE LL
Wireless Modem Router User Guide Turkey (1) 8 35 PPPoE LLC Turkey (2) 8 35 PPPoA VC-MUX 0 100 PPPoE LLC Thailand TRUE Thailand TOT 1 32 PPPoE LLC Thailand 3BB 0 33 PPPoE LLC 0 35 PPPoE LLC Thailand Cat Telecom Thailand BuddyBB 0 35 PPPoE LLC United States 4DV.
Wireless Modem Router User Guide United States Sprint (2) 8 35 PPPoE LLC United States Sprint Territory 0 35 PPPoE LLC United States SureWest Communications(1) 0 34 1483 Bridged LLC Snap United States SureWest Communications(2) 0 32 PPPoE LLC United States SureWest Communications(3) 0 32 PPPoA LLC 0 35 PPPoE LLC United States Toast.
Wireless Modem Router User Guide Spain Comunitel 0 33 1483 Bridged IP VC-MUX Spain Eresmas 8 35 1483 Bridged IP VC-MUX Spain Jazztel 8 35 IPOE VC-MUX Spain Jazztel ADSL2+ / Desagregado 8 35 1483 Bridged IP LLC-BRIDGING Spain OpenforYou 8 32 1483 Bridged IP VC-MUX Spain Tele2 8 35 1483 Bridged IP VC-MUX Spain Telefónica (España) 8 32 1483 Bridged IP LLC/SNAP Telefónica (Argentina) 8 35 1483 Bridged IP LLC-based Telefónica (Perú) 8 48 1483 Bridged IP VC-MUX
Wireless Modem Router User Guide Finland Saunalahti 0 100 1483 Bridged IP LLC Finland Elisa 0 100 1483 Bridged IP LLC Finland DNA 0 100 1483 Bridged IP LLC Finland Sonera 0 35 1483 Bridged IP LLC Iran [Shatel] Aria-Rasaneh-Tadbir 0 35 PPPOE LLC Iran Asia-Tech 0 35 PPPOE LLC Iran Pars-Online (Tehran) 35 PPPOE LLC Iran Pars-Online (Provinces) 0 59 PPPOE LLC Iran [Saba-Net] Neda-Gostar-Saba 0 35 PPPOE LLC Iran Pishgaman-Tose 0 35 PPPOE LLC Iran Fan-Ava 8 35
Wireless Modem Router User Guide Appendix 5 Regulatory Compliance Information CE Mark Warning This is a Class B product In a domestic environment,this product may cause radio interference,in which case the user may be required to take adequate measures.This device complies with EU 1999/5/EC. NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Wireless Modem Router User Guide This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
