User's Manual Part 1

Wireless N300 ADSL2+ High Power Modem Router
17
Go to To Set up WAN Service for ATM Interface to configure the WAN service for Internet access.
Tip
If you are unsure about the VPI/VCI parameters, see Appendix 4 VPI/VCI List, or ask your ISP to provide it.
To set up the ETH interface
Step 1: Select ETH Interface and click Add.
Step 2: Select eth0/eth0 in the box to function as a WAN port. Only one LAN port can be configured as the WAN port at
a time. Click Apply/Save to take the settings into effect.
