User's Manual Part 2

ManualsBrandsSHENZHEN TENDA TECHNOLOGY ManualsElectronicsWireless N300 ADSL2+ High Power Modem Router

Wireless N300 ADSL2+ High Power Modem Router

117

4.2.13 Storage Service

This section helps you to use USB Storage devices in your modem router, including the following parts:

• User Account: You can control the LAN users’ accessing to the USB storage device information, namely, some of

them can access the USB device info but others cannot.

• Storage Device Info: When you plug the USB storage device into the USB interface of your modem router, the router

can recognize that’s the USB storage device and then read the storage device’s information.

1) User Account

Before you share your USB storage on the internet, you need to add a storage user account. And only the users on the

user account list can visit the USB storage device plugged in the modem router. Thus, before you access the USB storage

device, you need to set the user account information.

To add a new account:

① Click Add to enter the user account configuration page.

Summary of content (59 pages)

PAGE 1
Wireless N300 ADSL2+ High Power Modem Router 4.2.13 Storage Service This section helps you to use USB Storage devices in your modem router, including the following parts: • User Account: You can control the LAN users’ accessing to the USB storage device information, namely, some of them can access the USB device info but others cannot.
PAGE 2
Wireless N300 ADSL2+ High Power Modem Router ② Name your USB storage account. ③ Specify a password to secure your USB storage account. ④ Enter your password again for a confirmation. ⑤ Enter the volume name of the USB storage, which is displayed in the Storage Device Info page. ⑥ Click Apply/Save to save your configurations.
PAGE 3
Wireless N300 ADSL2+ High Power Modem Router After your modem router recognizes the USB storage device, follow guidelines below for visiting the storage info via the computer on the LAN. Here takes Windows 7 as an example to explain the guidelines which are similar in other operation systems. ① Press Win+R keys. On the Run window, input \\192.168.1.1 (\\+ LAN IP address of the router), and then click OK. ② Double click the USB storage device icon (“mnt”).
PAGE 4
Wireless N300 ADSL2+ High Power Modem Router ③ Account authentication: Enter your user account name and password which were configured in User Account part in the corresponding box, and click OK. 4.2.14 Interface Grouping Interface Grouping supports multiple ports to PVC and bridging groups.
PAGE 5
Wireless N300 ADSL2+ High Power Modem Router network. Only the default group has IP interface. Click Advanced Setup > Interface Grouping to enter the following figure.  Click Add to enter the screen below. Group Name: The name of a configured rule. WAN Interface used in the grouping: WAN connection to which the interface grouping rules apply. Available LAN Interfaces: LAN interfaces that can be used for interface grouping. Grouped LAN Interfaces: LAN interfaces that use specified WAN interface.
PAGE 6
Wireless N300 ADSL2+ High Power Modem Router To create a new interface group:  Enter the Group name which should be unique.  Select the WAN interface that’s shared by the LAN interfaces in the interface group.  Select interfaces that will be connected to the specified WAN you will use. Note that these clients may obtain public IP addresses.  Click Apply/Save button to make the changes effective immediately.
PAGE 7
Wireless N300 ADSL2+ High Power Modem Router Attention: After successful interface grouping, clients connecting to interface 2 and 3 will obtain IP address different from 192.168.1.X, but same segment with 192.168.2.1. So clients access the device via 192.168.2.1. Note 1. After the settings above, you need to reboot the modem router to take the settings into effect. 2. After the settings above, the LAN IP address used by the Default group member is 192.168.1.1, the LAN IP of the second group member is 192.
PAGE 8
Wireless N300 ADSL2+ High Power Modem Router Tunnel Name: Specify the name of the tunnel. Mechanism: Currently, only 6RD configuration is supported. Associated WAN Interface: Specify the WAN interface of the tunnel. Associated LAN Interface: Specify the LAN interface of the tunnel. Manual: If you select Manual, configure the following settings also:  IPv4 Mask Length: Specify the IPv4 Mask Length.  6rd Prefix with Prefix Length: Specify the 6rd Prefix with Prefix Length.
PAGE 9
Wireless N300 ADSL2+ High Power Modem Router Tunnel Name: Specify the name of the tunnel. Mechanism: Currently, only DS-Lite configuration is supported. Associated WAN Interface: Specify the WAN interface of the tunnel. Associated LAN Interface: Specify the LAN interface of the tunnel. Manual: If you select Manual, enter the AFTR information also. Automatic: If Automatic is selected, no configurations are required. Apply/Save: Click to apply and save your settings. 4.2.
PAGE 10
Wireless N300 ADSL2+ High Power Modem Router To generate a certificate signing request: 1) Click the Create Certificate Request button to enter the page below. 2) Specify the Common Name, Organization Name and State/Province Name 3) Select your country or region. 4) Click Apply to apply your settings. To Import certificate： Click the Import Certificate button on the local certificates page to enter the page below.
PAGE 11
Wireless N300 ADSL2+ High Power Modem Router 1) Enter the certificate name. 2) Paste the certificate content and private key. 3) Click Apply to apply your settings. Trusted CA (Certificate Authority) Certificates Here you can add, view or remove CA certificates. CA certificates are used by you to verify peers' certificates. Maximum 4 certificates can be stored.
PAGE 12
Wireless N300 ADSL2+ High Power Modem Router To Import certificate: 1) Click the Import Certificate button to enter the page below. 2) Enter the certificate name.
PAGE 13
Wireless N300 ADSL2+ High Power Modem Router 3) Paste the certificate content. 4) Click Apply to apply your settings. 4.2.17 Multicast Here you can configure the multicast feature. To configure IGMP for IPv4 Check the LAN to LAN (Intra LAN) Multicast Enable box. Check the Membership Join Immediate (IPTV) box. This is only required for IPTV. Keep other options unchanged from factory defaults if you are not an advanced user. This is strongly recommended.
PAGE 14
Wireless N300 ADSL2+ High Power Modem Router 4.2.18 IPTV If you check the Enable IPTV checkbox, you must choose a layer2 interface, and then configure the PVC/VLAN info (ATM), or ETH port/VLAN info (ETH). Click Apply/Save button to save it. Enable IPTV: Check/uncheck to enable/disable the IPTV service. IPTV configuration for Phone Cable Access user: 1) Enable IPTV. 2) Select Layer2 interface: ATM Interface.
PAGE 15
Wireless N300 ADSL2+ High Power Modem Router 3) Configure an avaliable VPI/VCI value which should be provided by your ISP. 4) Click Apply/Save. IPTV configuration for Ethernet Cable Access user: 1) Enable IPTV. 2) Select Layer2 Interface: ETH Interface. 3) Click Apply/Save. After successful IPTV configuration, Port 4 on the back panel of the device can only be an IPTV port. Tip For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.
PAGE 16
Wireless N300 ADSL2+ High Power Modem Router channel set based on country requirements. Enable Wireless: Check/uncheck to enable/disable the wireless network. Hide Access Point: This option allows you to have your wireless network names (SSID) publicly broadcast or if you choose to enable it, the SSID will be hidden. SSID: Service Set Identifier. This is the name of your wireless network. Country: Select your country.
PAGE 17
Wireless N300 ADSL2+ High Power Modem Router Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or complicate configurations. Simply enter a PIN code on the device web interface or press hardware WPS button (on the back panel of the device) and a secure wireless connection is established.
PAGE 18
Wireless N300 ADSL2+ High Power Modem Router You can set the network authentication method, select data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Apply/Save" when done. Network Authentication: Select Open, Shared, 802.1X, WPA-PSK, WPA2-PSK or Mixed WPA/WPA2-PSK from the drop-down list to encrypt your wireless network.
PAGE 19
Wireless N300 ADSL2+ High Power Modem Router MAC Restrict Mode: Disabled, Allow and Deny  Allow: Only allow PCs at specified MAC addresses (in the list) to connect to your wireless network.  Deny: Block only PCs at specified MAC addresses from connecting to your wireless network.  Disabled: Disable MAC filter feature. Add: Click to add a MAC address. Remove: To delete an existing MAC address, first check the Remove box next to the MAC address in list and then click this button.
PAGE 20
Wireless N300 ADSL2+ High Power Modem Router Note 1) If you select “Allow” MAC restrict mode and directly click Apply/Save instead of adding any MAC address to be filtered, WPS will be disabled (You can go to Wireless > Security to check WPS status). 2) If you want to change the MAC filter mode above from “Allow” to “Deny”, just select Deny and click Apply/Save. 4.3.
PAGE 21
Wireless N300 ADSL2+ High Power Modem Router AP Mode: You can select Wireless Bridge (also known as Wireless Distribution System) to disable access point functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP. Bridge Action: There are three options available: Enabled, Enabled (Scan) and Disabled. Disabled in Bridge Action means disabling wireless bridge restriction.
PAGE 22
Wireless N300 ADSL2+ High Power Modem Router 4.4 Diagnostics 4.4.1 Diagnostics The modem router is capable of testing the connection to your DSL service provider, the connection to your Internet service provider and the connection to your local network. If a test displays a fail status, click "Rerun Diagnostic Tests" at the bottom of this page several times to verify the connection status. If the test continues to fail, click "Help" and follow the troubleshooting procedures.
PAGE 23
Wireless N300 ADSL2+ High Power Modem Router 4.5 Management This section explains the following information: • Settings • System Log • SNMP Agent • TR-069 Client • Internet Time • Access Control • Update Firmware • Reboot 4.5.
PAGE 24
Wireless N300 ADSL2+ High Power Modem Router Backup Here you can save a copy of your device’s configurations to your computer. Once you have configured the device, you can save these settings to a configuration file on your local hard drive. The configuration file can later be imported to your device in case the device is reset to factory default settings. Restore Backup Here you can restore the configuration from a backup file saved on your PC.
PAGE 25
Wireless N300 ADSL2+ High Power Modem Router you may need to remove the existing configuration and restore the factory default settings. 4.5.2 System Log Here you can view and configure the system log. To view the System Log, firstly ensure log is enabled, otherwise you cannot read any log.
PAGE 26
Wireless N300 ADSL2+ High Power Modem Router To configure the system log, click Configure System Log. Log: If Enable is selected, the system will begin to log all the selected events. Log Level: Set the log level. All events above or equal to the selected level will be logged. Display Level: Set the log display level. All logged events above or equal to the selected level will be displayed. Apply/Save: click to apply and save the system log settings. 4.5.
PAGE 27
Wireless N300 ADSL2+ High Power Modem Router SNMP Agent: Select “Enable” to activate the SNMP Agent feature or “Disable” to deactivate it. Read Community: Specify a Read Community string. The default is public. Set Community: Specify a Set Community string. The default is private. System Name: Specify a descriptive system name. System Location: Specify a system location. System Contact: Specify a system contact. Trap Manager IP: Specify the IP address of the Trap Manager. 4.5.
PAGE 28
Wireless N300 ADSL2+ High Power Modem Router Inform: Select Enable/Disable to enable/disable the TR-069 Client function. By default, it is disabled. Inform Interval: Specify the inform interval. ACS URL: Enter the ACS (Auto-Configuration Server) URL address. ACS User Name: Enter the ACS (Auto-Configuration Server) user name. ACS Password: Enter the ACS (Auto-Configuration Server) password. WAN Interface used by TR-069 client: Select the WAN interface used by the TR-069 client from the drop-down list.
PAGE 29
Wireless N300 ADSL2+ High Power Modem Router First/Second/Third/Fourth/Fifth NTP time server: Select a NTP time server from the drop-down list. If the NTP time server you are looking for is not included in the list, select “Other” and then enter it manually in the box. Time zone offset: Select your time zone from the drop-down list. 4.5.
PAGE 30
Wireless N300 ADSL2+ High Power Modem Router User Name: Enter the user name of up to 16 characters. Old Password: Enter the old password of up to 16 characters. New Password: Enter a new password of up to 16 characters. Confirm Password: Re-enter to confirm the new password. Apply/Save: Click to change or create passwords. Note 1. Password cannot contain a space. 2. The password of “support” account cannot be changed. It only can be “support”.
PAGE 31
Wireless N300 ADSL2+ High Power Modem Router 4.5.7 Update Firmware New firmware is released periodically to improve the functionality of your device and add any new features. If you run into a problem with a specific feature of the device, you could log in to our website (www.tendacn.com) to download the latest firmware to update your device. To update software, do as follows: 1) Download an upgrading firmware file from our website: www.tendacn.com and save it in your local hard drive.
PAGE 32
Wireless N300 ADSL2+ High Power Modem Router 148
PAGE 33
Wireless N300 ADSL2+ High Power Modem Router Appendix 1 Configure Your PC Screens to configure TCP/IP properties in other Operating Systems are similar to those below. Windows 8 Step 1: Right click the icon on the bottom right corner of your desktop. Step 2: Click Open Network and Sharing Center. Step 3: Click Ethernet -> Properties. Step 4: Find and double click Internet Protocol Version 4(TCP/IPv4).
PAGE 34
Wireless N300 ADSL2+ High Power Modem Router Step 5: Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK. Step 6: Click OK on the Ethernet Properties window (see Step 4 for the screenshot).
PAGE 35
Wireless N300 ADSL2+ High Power Modem Router Windows 7 Step 1: Click the icon on the bottom right corner of your desktop. Step 2: Click Open Network and Sharing Center. Tip: If you cannot find the icon on the bottom right corner of your desktop, follow steps below: Click Start -> Control Panel -> Network and Internet -> Network and Sharing Center. Step 3: Click Local Area Connection -> Properties. Step 4: Find and double click Internet Protocol Version 4(TCP/IPv4).
PAGE 36
Wireless N300 ADSL2+ High Power Modem Router Step 5: Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK. Step 6: Click OK on the Local Area Connection Properties window (see Step 4 for the screenshot).
PAGE 37
Wireless N300 ADSL2+ High Power Modem Router Windows XP Step 1: Right click My Network Places on your desktop and select Properties. Step 2: Right click Local Area Connection and select Properties. Step 3: Scroll down to find and double click Internet Protocol (TCP/IP). Step 4: Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.
PAGE 38
Wireless N300 ADSL2+ High Power Modem Router Step 5: Click OK on the Local Area Connection Properties window (see Step 3 for the screenshot). MAC Step 1: Click on the Apple icon from the top left corner and select System Preferences. Step 2: click Network from Internet & Network.
PAGE 39
Wireless N300 ADSL2+ High Power Modem Router Step 3: Click on Ethernet, choosing Using DHCP from configure, and click Apply to save.
PAGE 40
Wireless N300 ADSL2+ High Power Modem Router Appendix 2 Join Your Wireless Network Tip: 1. The PC you use must have installed a wireless network adapter. 2. The device's SSID is "Tenda_XXXXXX" by default (where "XXXXXX" is the last six characters of its MAC address). You can find the MAC address and/or SSID on the label attached to the device’s bottom). Windows 8 Step 1: Click the icon on the bottom right corner of your desktop.
PAGE 41
Wireless N300 ADSL2+ High Power Modem Router Windows 7 1. Click the icon on the bottom right corner of your desktop. 2. Double click your SSID (wireless network name) and then follow onscreen instructions. 3. When your SSID (wireless network name) displays Connected as shown below, you’ve connected to it for Internet access successfully.
PAGE 42
Wireless N300 ADSL2+ High Power Modem Router Windows XP 1. Right click My Network Places, and select Properties. 2. Right click Local Area Connection, and select View Available Wireless Networks from the pop-up submenu.
PAGE 43
Wireless N300 ADSL2+ High Power Modem Router 3. Select your wireless network from the list and then follow onscreen instructions. 4. When your SSID (wireless network name) displays Connected as shown below, you’ve connected to it for Internet access successfully.
PAGE 44
Wireless N300 ADSL2+ High Power Modem Router MAC Step 1: Click > System Preferences. Step 2: Select Network from Internet & Network.
PAGE 45
Wireless N300 ADSL2+ High Power Modem Router Step 3: Step 4: Enter the wireless password, and click Join to connect the selected SSID.
PAGE 46
Wireless N300 ADSL2+ High Power Modem Router iPhone/iPad Step 1: Step 2: Step 3: Enter the passwork and click Join to connect the selected SSID.
PAGE 47
Wireless N300 ADSL2+ High Power Modem Router 163
PAGE 48
Wireless N300 ADSL2+ High Power Modem Router Appendix 3 FAQs 1. What information should I have to access the Internet via the ADSL uplink? If you have DSL broadband service, you might need the following information to set up your modem router.
PAGE 49
Wireless N300 ADSL2+ High Power Modem Router Follow below steps to verify that wireless service is enabled on your notebook (for Windows XP OS only). From the desktop, right click on the My Computer icon and select Manage. Select Services and Applications, double click Services and view the status of Wireless Zero Configuration.
PAGE 50
Wireless N300 ADSL2+ High Power Modem Router Appendix 4 VPI/VCI List The following table lists common ISPs and their VPI and VCI numbers. If you cannot locate your ISP and their VPI and VCI information here, ask your ISP to provide it.
PAGE 51
Wireless N300 ADSL2+ High Power Modem Router Brazil Telmar 0 33 PPPoE LLC Brazil South Region 1 32 PPPoE LLC Canada Primus Canada 0 35 PPPoE LLC Canada Rogers Canada (1) 0 35 PPPoE LLC Canada Rogers Canada (2) 8 35 1483 Bridged IP LLC Canada Rogers Canada (3) 0 35 1484 Bridged IP LLC Canada BellSouth(1) Canada 8 35 PPPoE LLC Canada BellSouth(2) Canada 0 35 PPPoE LLC Canada Sprint (1) Canada 0 35 PPPoA LLC Canada Sprint (2) Canada 8 35 PPPoE LLC Canada Veri
PAGE 52
Wireless N300 ADSL2+ High Power Modem Router Hungary Sci-Network 0 35 PPPoE LLC Iceland Islandssimi 0 35 PPPoA VC-MUX Iceland Siminn 8 48 PPPoA VC-MUX India Airtel 1 32 1483 Bridged IP LLC India BSNL 0 35 1483 Bridged IP LLC India MTNL 0 35 1483 Bridged IP LLC 0 35 PPPOE LLC RELIANCE India COMMUNICATION India TATA INDICOM 0 32 PPPOE LLC India CONNECT 1 32 PPPOE LLC 8 81 PPPoE LLC 0 35 PPPOE LLC Indonesia Speedy Telkomnet Iran [Shatel] Aria-Rasaneh-Tadb
PAGE 53
Wireless N300 ADSL2+ High Power Modem Router Italy 8 35 1483 Bridged IP LLC Italy 8 35 PPPoA VC-MUX Jamaica (1) 8 35 PPPoA VC-MUX Jamaica (2) 0 35 PPPoA VC-MUX Jamaica (3) 8 35 1483 Bridged IP LLC SNAP Jamaica (4) 0 35 1483 Bridged IP LLC SNAP 0 40 LLC/SNAP Bridging Kazakhstan 0 33 PPPoA VC-MUX kuwait unitednetwork 0 33 1483 Bridged IP LLC 0 35 PPPOE LLC 0 35 PPPoE LLC Kazakhtelecom Kazakhstan «Megaline» Malaysia Streamyx Malaysia Mexico Telmex (1) 8 81 PPP
PAGE 54
Wireless N300 ADSL2+ High Power Modem Router Portugal Puerto Rico Coqui.
PAGE 55
Wireless N300 ADSL2+ High Power Modem Router Spain Uni2 1 33 1483 Bridged IP VC-MUX Spain Orange 8 35 1483 Bridged IP VC-MUX Spain Orange 20 Megas 8 35 LLC-BRIDGING Spain Orange 8 32 1483 Bridged IP LLC/SNAP Spain Ya.com 8 32 1483 Bridged IP VC - MUX Spain Ya.
PAGE 56
Wireless N300 ADSL2+ High Power Modem Router United States August.net (1) 0 35 1483 Bridged IP LLC United States August.net (2) 8 35 1483 Bridged IP LLC United States BellSouth 8 35 PPPoE LLC United States Casstle.Net 0 96 1483 Bridged IP LLC United States CenturyTel (1) 8 35 PPPoE LLC United States CenturyTel (2) 8 35 1483 Bridged IP LLC United States Coqui.
PAGE 57
Wireless N300 ADSL2+ High Power Modem Router United States United States United States United States Sprint Territory SureWest Communications(1) SureWest Communications(2) SureWest Communications(3) 0 35 PPPoE LLC 0 34 1483 Bridged LLC Snap 0 32 PPPoE LLC 0 32 PPPoA LLC United States Toast.
PAGE 58
Wireless N300 ADSL2+ High Power Modem Router Appendix 5 Regulatory Compliance Information CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
PAGE 59
Wireless N300 ADSL2+ High Power Modem Router Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.