High Power Wireless AC1200 Dual Band Router ④ Click Change adapter settings. ⑤ Click Local Area Connection and select Properties.
High Power Wireless AC1200 Dual Band Router ⑥ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
High Power Wireless AC1200 Dual Band Router ⑦ Select Obtain an IP address automatically and click OK.
High Power Wireless AC1200 Dual Band Router ⑧ Click OK on the Local Area Connection Properties window to save your settings.
High Power Wireless AC1200 Dual Band Router Windows XP ① Right-click My Network Places and select Properties. ② Right click Local Area Connection and select Properties.
High Power Wireless AC1200 Dual Band Router ③ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
High Power Wireless AC1200 Dual Band Router ④ Select Obtain an IP address automatically and click OK.
High Power Wireless AC1200 Dual Band Router ⑤ Click OK on the Local Area Connection Properties window to save your settings.
High Power Wireless AC1200 Dual Band Router Appendix 2 Join Your Wireless Network Tip ------------------------------------------------------------- To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one. -------------------------------------------------------------------- Join Your Wireless Network - Windows 7 ① Click Start -> Control Panel.
High Power Wireless AC1200 Dual Band Router ② Click Network and Internet. ③ Click Network and Sharing Center.
High Power Wireless AC1200 Dual Band Router ④ Click Change adapter settings. ⑤ Right click the Wireless Network Connect/Disconnect.
High Power Wireless AC1200 Dual Band Router ⑥ Select the wireless network you wi sh to connect and click Connect. Depending on whether you are joining a secured or unsecured wireless network, you will see different screens: A. If you are joining an unsecured wireless network as seen below: B.
High Power Wireless AC1200 Dual Band Router You are required to enter a security on the following screen. Enter the security key and click OK. ⑦ When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully.
High Power Wireless AC1200 Dual Band Router Appendix 3 Factory Default Settings Item Router Login Default Settings Login IP Address Internet Type Connection bottom of your device. Network Settings MTU PPPoE: 1450 Dynamic IP: 1450 Static IP: 1450 WAN Speed Auto-negotiation DNS Disabled IP Address 192.168.0.1 Subnet Mask 255.255.255.0 DHCP Server Enabled IP Pool 192.168.0.100~192.168.0.
High Power Wireless AC1200 Dual Band Router UPnP Enabled Security Disabled 130
High Power Wireless AC1200 Dual Band Router Appendix 4 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, pl ease fe el fre e to go to www.ten dacn.com to find a solution or emai l your problems to: sup port@tenda .com.cn or support02@te nda.com.cn. We wi ll be more than happ y to help you out as soon as possi ble. 1.
High Power Wireless AC1200 Dual Band Router Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.0.1. Make sure the statically assigned IP addresses to the PCs on LAN are not used by others PCs. 4. Q: I have problems connecting to Internet/Secure websites do not open or displays only part of a web page. What should I do? This problem mainly happens to users who use the PPPoE or Dynamic IP Internet connection type.
High Power Wireless AC1200 Dual Band Router Appendix 5 Remove Wireless Network from Your PC If you change wireless settings on your wireless device, you must remove them accordingly from your PC; otherwise, you may not be able to wirelessly connect to this device. Below describes how to do remove a wireless network from your PC. Windows 7 ① Right-click the Network icon and select Properties. ② Select Manage Wireless Networks .
High Power Wireless AC1200 Dual Band Router ③ Select the wireless network and click Remove network. Windows XP ① Right-click My Network Places and select Properties.
High Power Wireless AC1200 Dual Band Router ② Right click Wireless Network Connection and then select Properties.
High Power Wireless AC1200 Dual Band Router ③ Click Wireless Networks, select the wireless network name under Preferred networks and then click the Remove button.
High Power Wireless AC1200 Dual Band Router Appendix 6 Safety and Emission Statement CE Mark Warning This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification s to this equipment.
High Power Wireless AC1200 Dual Band Router - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV techn ician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
