Wireless N150 Outdoor Long Range AP/Router 4.7 ConnectionStatus This section displays the info of connected wireless clients including MAC addresses and encryption info, etc.
Wireless N150 Outdoor Long Range AP/Router Chapter5 Advanced Applications The Advanced tab only works on router mode, it has the following 7 submenus: Bandwidth Settings, Connection Status, DDNS, Virtual Server, DMZ Host, UPnP, Routing Table and Static Routing. 5.1 Bandwidth Settings Bandwidth control is used for limit internal network speed. It supports IP address range configuration. Click Add and below screen will appear. \ 61
Wireless N150 Outdoor Long Range AP/Router Enable: Check/uncheck to enable/disable current entry. When disabled, corresponding entry will not take effect though existing in fact. IP Range: Enter a single IP or an IP range. Uplink Bandwidth: Max uplink traffic. Downlink Bandwidth: Max downlink traffic. Description: Briefly describe the current rule, the Max number of rule is 10. 5.
Wireless N150 Outdoor Long Range AP/Router 5.3 DDNS Dynamic DNS or DDNS is a method of updating, in real time, a Domain Name System (DNS) to point to a changing IP address on the Internet. This is used to provide a persistent domain name for a resource that may change location on the network. 1、Mostly, broadband ISP (Internet service provider) only provide client with Dynamic IP address.
Wireless N150 Outdoor Long Range AP/Router service provider. Password: Enter the DDNS Password registered with your DDNS service provider. Domain Name: Enter the DDNS domain name with your DDNS service provider. For example: If you have registered a DDNS service from no-ip.com for a web server on the host at 192.168.2.10 and get below info: User Name Tenda Password 123456 Domain Name tenda.zapto.
Wireless N150 Outdoor Long Range AP/Router First set a mapping rule on Virtual Server interface (For details, see Virtual Server section) and then enter the registered user name, password and domain name as shown below: Then Click Save to save the settings. Simply input "http://tenda.zapto.org" in a launched web browser and your web server will be accessible.
Wireless N150 Outdoor Long Range AP/Router 5.4 Virtual Server Defines the mapping between the service port range of WAN access and LAN server, all of the WAN ports used within the scope of access will be re-positioned to the LAN network server specified by IP address. Ext Port-Int Port: WAN service port. Internal LAN PC port corresponding mapped to an external port. Private IP: The IP address of a computer used as a server in LAN. Protocol: Includes TCP, UDP and Both.
Wireless N150 Outdoor Long Range AP/Router in the drop-down list. Select one and select a sequence number in the ID drop-down list and then click “Add”, this port will be added automatically to the ID list. For other well-known service ports that are not listed, you can manually add them to the list. Add to: Add the selected well-known port to the policy ID.
Wireless N150 Outdoor Long Range AP/Router Notice: If you set the service port of the virtual server as 80, you must set the Web Management port on Remote Web Management screen to be any value except 80 such as 8080. Otherwise, there will be a conflict to disable the virtual server. 5.5 DMZ Host The DMZ Settings screen allows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing.
Wireless N150 Outdoor Long Range AP/Router Notice: When the DMZ host is enabled, the firewall settings of the DMZ host will not function. 5.6 UPnP With the UPnP (Universal Plug and Play) function, the internal host can request the router to process some special port switching so as to enable the external host to visit the resources of the internal host. UPnP works in Windows XP, Windows ME or later (Note: Operational system needs to be integrated with or installed with DirectX 9.
Wireless N150 Outdoor Long Range AP/Router 5.7 Routing Table This page shows the router’s core routing table. The main duty for a router is to look for a best path for every data packet, and transfer this data packet to a destination station. In order to fulfill this function, many transferring paths, i.e. routing table, are saved in the router, for choosing when needed.
Wireless N150 Outdoor Long Range AP/Router 5.8 Static Routing This page is used to set the router’s static routing under router mode. Click Add, the following page you will see. Destination Network: The destination host or IP segment you visit. Subnet Mask: Enter the subnet mask, generally it is 255.255.255.0 Getaway: The entry IP address of the next router. Interface: If destination need go through WAN port, then set it as WAN. Otherwise, set it as LAN.
Wireless N150 Outdoor Long Range AP/Router Chapter 6. Security Settings 6.1 Mac Address Filter Security Settings only fits for Wireless Router Mode. To better manage PCs in LAN, you can use the MAC Address Filter function to allow/disallow such PCs to access to Internet. In Filter Mode, you can choose Disable, Allow Access to Internet, and Deny Access to Internet. If you choose Allow Access to Internet, you will see the following configuration page.
Wireless N150 Outdoor Long Range AP/Router Deny Access to Internet: Disallow only PCs at specified MAC addresses to access Internet. Other PCs are allowed. Allow Access to Internet: Allow only PCs at specified MAC addresses to access Internet. Other PCs are denied Select: Select a number (indicating a corresponding entry) from the drop-down menu. Up to 10 rules can be set. Enable: Check/uncheck to enable/disable the corresponding entry. Description: Enter a meaningful name to you for corresponding entry.
Wireless N150 Outdoor Long Range AP/Router Click Save to save the settings.
Wireless N150 Outdoor Long Range AP/Router 6.2 Client Filter To better manage PCs in LAN, you can allow or disallow such PCs to access certain ports on Internet using the Client Filter functionality. Filter Mode: Select Deny or Allow according to your own needs. Disable: disable the corresponding entry. Deny Access to Internet: Disallow PCs at specified IP addresses to access certain ports on Internet. Allow Access to Internet: Allow only PCs at specified IP addresses to access certain ports on Internet.
Wireless N150 Outdoor Long Range AP/Router Enable: Check/uncheck to enable/disable the corresponding entry. Description: Enter a meaningful name to yourself for a new filter rule. Start IP: Enter a starting IP address. End IP: Enter an ending IP address. Port: Enter TCP/UDP protocol port number (s); it can be a range of ports or a single port from 1 to 65534. Traffic Type: Select a protocol or protocols for the traffic (TCP/UDP/Both). Time: Select a time range for the rule to take effect.
Wireless N150 Outdoor Long Range AP/Router Click Save to save the settings.
Wireless N150 Outdoor Long Range AP/Router 6.3 URL Filter To better control LAN PCs, you can use the URL filter functionality to allow or disallow such PC to access certain websites within a specified time range. In Filter Mode, you can choose Disable, Allow Access to Websites, and Deny Access to Websites. You will see the page below. Filter Mode: Select Deny or Allow according to your own needs. Deny Access to Websites: Disallow PCs at specified IP addresses to access websites with certain URL string.
Wireless N150 Outdoor Long Range AP/Router Select: Select a number (indicating a filter rule) from the drop-down menu. Up to 10 rules can be set. Description: Enter a meaningful name to yourself for a new filter rule. Start IP: Enter a starting IP address. End IP: Enter an ending IP address. URL String: Enter domain names or a part of a domain name that needs to be filtered out. Time: Select a time range for the corresponding entry to take effect.
Wireless N150 Outdoor Long Range AP/Router 6.4 Remote Web Management The Remote Web management allows the Router to be configured from the Internet by a web browser. Enable: Select whether to enable the Remote Web-based Management feature. Port: Remote admin port; the port used by trusted hosts from Internet or other external networks to access and manage the device remotely via a web browser.
Wireless N150 Outdoor Long Range AP/Router with a specific IP address, say, 218.88.93.33, makes the device only remotely accessible to the PC at the specified IP address.
Wireless N150 Outdoor Long Range AP/Router Chapter 7 SNMP Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is widely used in local area networks (LAN) for collecting information, and managing and monitoring, network devices. For using this function, please enable it and provide the information which the following page need. System contact：Set the name to access the AP. Usually set the Device Name：Set the AP’s name, such as Tenda_W1500A.
Wireless N150 Outdoor Long Range AP/Router Chapter 8 System tools This section focuses on how to maintain AP, including Syslog, Statistics, Time & Date, Change Password, Backup, Restore, Firmware Update, Restore to Factory Default, Reboot. 8.1 Syslog The section is to view the system log. You can view the various statuses after system startup and check whether there’s network attack. If the log is over 200 records, it will clear them automatically. Refresh: Click this button to update the log.
Wireless N150 Outdoor Long Range AP/Router 8.2 Statistics Statistics is only for routing mode. This section will display the LAN IP addresses and the corresponding packet traffic status of the local network. Enable Traffic Statistics: Tick this box to enable the network user traffic statistics. If there is no need to, we suggest turn off this function. Refresh: Click this button to update the statistic list.
Wireless N150 Outdoor Long Range AP/Router 8.3 Time & Date This section is to select the time zone for your location. You can select your own time or obtain the standard GMT time from Internet. Sync with Internet time servers：Obtain the standard GMT Sync Interval：System time synchronization interval. Please choose according to time from Internet automatically. your need, the system default cycle time is half an hour. Time Zone：Select your time zone from the drop-down menu.
Wireless N150 Outdoor Long Range AP/Router 8.4 Change Password This section is to set a new user name and password to better secure your device and network. Type in correct parameters in the blank and click save to finish the username and password settings. Old User Name: Enter the old username. Old Password: Enter the old password. New Username: Enter a new user name for the device. New Password: Enter a new password for the device.
Wireless N150 Outdoor Long Range AP/Router 8.5 Backup Backup: Click this button to back up the device’s configurations.
Wireless N150 Outdoor Long Range AP/Router 8.6 Restore Choose File: Click this button to browse the directory where you backup or save the device’s settings. Restore: Click this button to restore the device’s configurations.
Wireless N150 Outdoor Long Range AP/Router 8.7 Firmware Update By upgrading the router's software, you will get more stable version and appreciation of the routing function. Firmware Update Steps： On the Firmware Upgrade screen, click the Choose File button and find the new firmware file. Click Update button, and follow the on-screen instructions. After the upgrade is completed, the device will reboot automatically.
Wireless N150 Outdoor Long Range AP/Router 8.8 Restore to Factory Default Restore to Factory Default: Click this button is to reset all configurations to the default values. It means the device will lose all the settings you have set. Factory Default Settings: User Name: admin Password: admin IP Address: 192.168.2.1 Subnet Mask: 255.255.255.
Wireless N150 Outdoor Long Range AP/Router 8.9 Reboot This page is used to reboot the device. Rebooting the device makes the settings configured go into effect. This process will take about one minute. Reboot: Click this button to reboot the device.
Wireless N150 Outdoor Long Range AP/Router Appendix 1 TCP/IP Settings If you are using Windows XP, do as follows: 1. From the desktop, click Start > Control Panel > Network and Internet Connections.
Wireless N150 Outdoor Long Range AP/Router 2. Right-click on the Local Area Connection and select Properties.
Wireless N150 Outdoor Long Range AP/Router 3. Select Internet Protocol (TCP/IP) and click Properties.
Wireless N150 Outdoor Long Range AP/Router 4. Select Use the following IP address. IP address: Enter 192.168.2.xxx where xxx can be any number between 2 and 253). Subnet mask: Enter 255.255.255.0. Click OK twice to save your settings.
Wireless N150 Outdoor Long Range AP/Router If you are using Windows 7, do as follows: 1. Click on Start-> Control Panel -> Network and Internet-> Network and Sharing Center. Click Change adapter settings. 2. Right-click on the Local Area Connection and select Properties.
Wireless N150 Outdoor Long Range AP/Router 3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
Wireless N150 Outdoor Long Range AP/Router 4. Select Use the following IP address. IP address: Enter 192.168.2.xxx where xxx can be any number between 2 and 253). Subnet mask: Enter 255.255.255.0. Click OK twice to save your settings.
Wireless N150 Outdoor Long Range AP/Router Appendix 2: Glossary Channel A communication channel, also known as channel, refers either to a physical transmission medium such as a wire or to a logical connection over a multiplexed medium such as a radio channel. It is used to transfer an information signal, such as a digital bit stream, from one or more transmitters to one or more receivers. If there is only one AP in the range, select any channel you like. The default is Auto.
Wireless N150 Outdoor Long Range AP/Router Keys while dynamic WEP encryption changes WEP key dynamically. WPA/WPA2 The WPA protocol implements the majority of the IEEE 802.11i standard. It enhances data encryption through the Temporal Key Integrity Protocol (TKIP) which is a 128-bit per-packet key, meaning that it dynamically generates a new key for each packet. WPA also includes a message integrity check feature to prevent data packets from being hampered with.
Wireless N150 Outdoor Long Range AP/Router Appendix 3 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, please go to our website of www.tendacn.com or e-mail to support@tenda.cn for help. 1. Q: I entered the device’s LAN IP address in the web browser but cannot access the utility.
Wireless N150 Outdoor Long Range AP/Router address is not used by another PC or device. In case that two computers or devices share the same IP addresses, change either to a different address. 4.
Wireless N150 Outdoor Long Range AP/Router For your reference, we collected a list of some well-known service ports as follows: For your reference, we collected a list of some well-known service ports as follows: Server Protocol Service Port Web Server TCP 80 FTP Server TCP 21 Telnet TCP 23 NetMeeting TCP 1503、1720 SKype TCP/UDP File Send:6891-6900(TCP) Voice:1863、6901(TCP) Voice:1863、5190(UDP) PPTP VPN TCP 1723 Iphone5.
Wireless N150 Outdoor Long Range AP/Router Appendix 4 Safety and Emission Statement CE Mark Warning This is a Class B product In a domestic environment,this product may cause radio interference,in which case the user may be required to take adequate measures.This device complies with EU 1999/5/EC. NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Wireless N150 Outdoor Long Range AP/Router party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
